Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling with front release, rear removable crimp contacts. Full assessment level
直流和低频用多触点圆形电连接器详细规范 带有前释放装置、后可拆卸压接触点的卡扣式接头 全面评估水平

1982-04-15

Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Mercury wetted make contact units for general application
电子元件质量评定协调体系规范 空白详细规范 一般应用的湿汞接触单元

1984-08-15

Specification for harmonized system of quality assessment for electronic components. Blank detail specification: mercury wetted change-over contact units, magnetically biased
电子元件质量评定协调体系规范 空白详细规范:磁偏置汞湿转换触点

1987-01-15

Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification approval)
电子元件质量评定协调体系 总规范:离散压力接触功率半导体器件（资格认证）

1998-07-15

Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality
频率低于3 MHz的矩形连接器 - 第7部分:具有极化导轨或螺旋开关和16号（13 A）圆形触点的连接器的详细规格 - 具有闭合压接筒 后插入/前端释放的可拆卸压接触点类型质量

1991-12-20

Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet couplingnon-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealedwith non-removable solder contact styles. Full plus airframe fit assessment
直流和低频用多触点圆形电连接器详细规范 卡口接头无障碍密封 耐环境 后部可插入 后部释放 后部可拆卸压接触点 也采用不可拆卸焊接触点类型进行障碍密封 傅

1990-10-15

Harmonized system of quality assessment for electronic components-Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
电子元件质量评定协调体系

2000-04-15

Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types
频率低于3 Mhz的矩形连接器 - 第2部分:一系列连接器的详细规范 具有质量评定 梯形金属壳和圆形触点 - 固定焊接端子类型

1992-11-13

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications-Rectangular connectors with assessed quality-Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
直流、低频模拟和数字高速数据应用中使用的连接器

2004-10-20

Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types
修改件1.频率低于3MHz的矩形连接器.第2部分:带梯形金属外壳和圆形触点的一系列经质量评定的连接器的详细规范.固定焊接触点类型

1996-01-30

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 x 2,54 mm centre-line
经质量评估的连接器 用于直流、低频模拟和数字高速数据应用 矩形连接器 在1.27x2.54mm中心线上带梯形外壳和不可拆卸矩形触点的屏蔽连接器系列详细规范

1998-01-15

CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 M
经质量评估的连接器 用于直流低频模拟和数字高速数据应用 第3部分:矩形连接器 第101节:带梯形外壳和1.27 M电缆上不可拆卸矩形触点的屏蔽连接器系列详细规范

1999-09-30

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
直流、低频模拟和数字高速数据应用连接器.第3-100部分:质量评定的矩形连接器.一系列屏蔽连接器的详细规范 该连接器具有梯形外壳和1.27mm双列上的不可拆卸带状触点

1999-11-16

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors-Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
经质量评估的连接器 用于直流、低频模拟和数字高速数据应用 矩形连接器

2004-02-26

Harmonized system of quality assessment for electronic components. Detail specification-Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
电子元件质量评定协调体系 详细规格

2000-04-15

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
直流、低频模拟和数字高速数据应用用经质量评定的连接器第3部分:矩形连接器第101节:在1.27mm x 2.54mm中心线上带梯形外壳和不可拆卸矩形触点的屏蔽连接器详细规范

1997-09-05

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1.27 mm double row (IEC 61076-3-100:1999); German version EN 61076-3-100:2000
直流、低频模拟和数字高速数据应用用连接器.第3-100部分:经质量评定的矩形连接器；在1.27 mm双排（IE）上具有梯形外壳和不可拆卸带状触点的屏蔽连接器系列详细规范

2000-10-01

Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1.27 × 2.54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997
直流低频模拟和数字高速数据应用用经质量评定的连接器.第3部分:矩形连接器；第101节:带梯形外壳和不可拆卸矩形触点的一系列屏蔽连接器的详细规范1.27

1998-05-01

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors-Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
经质量评估的连接器 用于直流、低频模拟和数字高速数据应用 印制板连接器 包括电信和音频设备在内的广泛应用中使用的带3至8个触点的9 mm圆形连接器详细规范

1998-10-15

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication.
直流、低频模拟和数字高速数据应用中使用的经质量评定的连接器.第4部分:印制板连接器.第105节:包括电信在内的广泛应用中使用的带3至8个触点的9mm圆形连接器的详细规范

1995-06-19