IEC 61587-1:20 22规定了空外壳（即机柜、机架、子机架、机箱、机箱集成子机架和相关插入式单元）在室内条件下使用和运输的环境要求、测试设置以及安全方面。它定义了这些产品的分类（产品性能水平），关于并模拟了它们在使用过程中通常产生的负载。对于机械静态和动态载荷测试，使用虚拟载荷的典型示例。 本文件的目的是建立规定的物理性能水平，以满足制造、储存、运输和最终位置条件的某些要求。 本文件通常仅适用于上述机械结构。 这第五版取消并取代了2016年出版的第四版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: a)标题的修改。 b)修订条款6、7和8，包括新定义的测试设置。 c)与IEC 61587-2、IEC 61587-3和IEC 61587-5的兼容性。

IEC 61587-1:2022 specifies environmental requirements, test set-ups, as well as safety aspects for empty enclosures, i.e. cabinets, racks, subracks, chassis, chassis integrated subracks and associated plug-in units under indoor condition use and transportation. It defines classifications (product performance levels) for these products, regarding and simulating the usually arising loads during their use. For mechanical static and dynamic load tests typical examples with dummy loads are used.
The purpose of this document is to establish defined levels of physical performance in order to meet certain requirements of manufacture, storage, transport and final location conditions.
This document applies in general only to the above cited mechanical structures.
This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Modification of title.
b) Revision of Clauses 6, 7 and 8 including new defined test setups.
c) Compatibility with IEC 61587-2, IEC 61587-3 and IEC 61587-5.