1.1 本规范涵盖了装载集装箱的测试程序。进行跌落和振动测试以测量运输容器保护产品免受容器在正常处理和运输过程中受到的冲击和振动的能力。本质量标准无意取代材料质量标准或现有装运前试验程序。 本规范不适用于危险材料 . 1.2 这些程序适用于所有类型的实验室设备，包括可重复使用和一次性的宏观和微观产品。 1.3 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对SI单位的数学转换，仅供参考，不被视为标准。1.4 以下注意事项仅适用于试验方法部分，章节 4 本说明书: 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers the procedures for testing loaded shipping containers. Drop and vibration tests are performed to measure the ability of the shipping container to protect the product from the shock and vibration the container receives during normal handling and transporting. This specification is not intended to supplant material specifications or existing preshipment test procedures. This specification is not intended for use with hazardous materials . 1.2 These procedures are suitable for all types of laboratory apparatus, including reusable and disposable macro and micro products. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test method portion, Section 4 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.