BS EN ISO 11469:2016规定了一种统一的产品标识系统，该系统已被认证 由塑料材料制成。用于标记的一个或多个过程的规定如下: 不在本国际标准的范围内。注1:标记的精确细节，例如待标记项目的最小尺寸、字母大小、， 标记的适当位置取决于制造商和用户之间的协议。该标记系统旨在帮助识别塑料产品，以供后续决定 处理、废物回收或处置。塑料的通用标识由中给出的符号和缩略语提供 ISO 1043-1、ISO 1043-2、ISO 1043-3和ISO 1043-4。注2:如果需要更详细的材料标识信息，则需要塑料的附加标记 产品可按相应产品标准的规定使用。本国际标准无意取代、取代或以任何方式干扰 产品标准或法规中规定的标签要求。交叉引用:ISO 472ISO 1043-1ISO 1043-2ISO 1043-3ISO 1043-4购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN ISO 11469:2016 specifies a system of uniform marking of products that have been fabricated from plastics materials. Provision for the process or processes to be used for marking is outside the scope of this International Standard.NOTE 1 Precise details of the marking, e.g. the minimum size of the item to be marked, the size of the lettering, the appropriate location of the marking, are subject to agreement between the manufacturer and the user.The marking system is intended to help identify plastics products for subsequent decisions concerning handling, waste recovery or disposal.Generic identification of the plastics is provided by the symbols and abbreviated terms given in ISO 1043-1, ISO 1043-2, ISO 1043-3 and ISO 1043-4.NOTE 2 If more detailed information for material identification is needed, additional marking of plastics products can be applied as defined in the appropriate product standard.This International Standard is not intended to supplant, replace or in any way interfere with the requirements for labelling specified in product standards or legislation.Cross References:ISO 472ISO 1043-1ISO 1043-2ISO 1043-3ISO 1043-4All current amendments available at time of purchase are included with the purchase of this document.