现行

BS EN ISO 898-3-2018+A1-2021

Fasteners. Mechanical properties of fasteners made of carbon steel and alloy steel-Flat washers with specified property classes
紧固件 碳钢和合金钢制紧固件的机械性能

2021-06-24

现行

ISO 898-2-2022

Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes
紧固件.碳钢和合金钢制紧固件的机械性能.第2部分:规定性能等级的螺母

2022-09-30

现行

AS 4291.1-2015

Mechanical properties of fasteners made of carbon steel and alloy steel, Part 1: Bolts, screws and studs
碳钢和合金钢制紧固件的机械性能第1部分:螺栓、螺钉和螺柱

2015-08-26

现行

ISO 898-3-2018

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
碳钢和合金钢制紧固件的机械性能第3部分:规定性能等级的平垫圈

2018-05-28

现行

ISO 898-3-2018/Amd 1-2020

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes — Amendment 1
碳钢和合金钢制紧固件的机械性能第3部分:规定性能等级的平垫圈修改件1

2020-08-11

现行

JIS B 1053-1999

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses
碳钢和合金钢制紧固件的机械性能第5部分:不承受拉伸应力的固定螺钉和类似螺纹紧固件

1999-01-01

现行

AS/NZS 4291.2-2016

Mechanical properties of fasteners made of carbon steel and alloy steel, Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能第2部分:规定性能等级的螺母粗牙螺纹和细牙螺纹

2016-07-21

现行

DIN EN ISO 898-3

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
碳钢和合金钢制紧固件的机械性能.第3部分:规定性能等级的平垫圈（ISO 898-3-2018）

2018-09-01

现行

BS EN ISO 898-1-2013

Mechanical properties of fasteners made of carbon steel and alloy steel-Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能

2013-01-31

现行

JIS B 1051-2014

Mechanical properties of fasteners made of carbon steel and alloy steel -- Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
碳钢和合金钢制紧固件机械性能规定性能等级的螺栓、螺钉和螺柱粗牙螺纹和细牙螺纹

2014-01-01

现行

GOST ISO 898-2-2015

Механические свойства крепежных изделий из углеродистых и легированных сталей. Часть 2. Гайки установленных классов прочности с крупным и мелким шагом резьбы
由碳钢和合金钢制成的紧固件的机械性能 具有粗线和细间距螺纹的指定属性类的螺母

2015-09-29

现行

BS 06/30151815 DC

BS ISO 898-1. Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs
BS ISO 898-1 碳钢和合金钢制紧固件的机械性能 第一部分 螺栓、螺钉和螺柱

2006-12-01

现行

GOST ISO 898-1-2014

Механические свойства крепежных изделий из углеродистых и легированных сталей. Часть 1. Болты, винты и шпильки установленных классов прочности с крупным и мелким шагом резьбы
由碳钢和合金钢制成的紧固件的机械性能 具有粗细和细间距螺纹的指定属性等级的螺栓 螺钉和螺柱

2014-10-20

现行

BS EN ISO 898-5-2012

Mechanical properties of fasteners made of carbon steel and alloy steel-Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能

2012-06-30

现行

ISO 898-1-2013

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能第1部分:规定性能等级的螺栓、螺钉和螺柱；粗牙和细牙螺纹

2013-01-14

现行

UNE-EN ISO 898-5-1999

MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL. PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS NOT UNDER TENSILE STRESSES. (ISO 898-5:1998).
碳钢和合金钢制紧固件的机械性能 第5部分:不承受拉伸应力的固定螺钉和类似螺纹紧固件 （ISO 898-5-1998）

1999-02-03

现行

GOST ISO 898-5-2014

Механические свойства крепежных изделий из углеродистых и легированных сталей. Часть 5. Установочные винты и аналогичные резьбовые крепежные изделия установленных классов твердости с крупным и мелким шагом резьбы
由碳钢和合金钢制成的紧固件的机械性能 第5部分 固定螺丝和类似的螺纹紧固件 具有规定的硬度等级 粗螺纹和细螺距螺纹

2014-12-05

现行

ISO 898-5-2012

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能第5部分:规定硬度等级的固定螺钉和类似螺纹紧固件；粗牙和细牙螺纹

2012-05-30

现行

AS 4291.7-2000

Mechanical properties of fasteners made of carbon steel and alloy steel, Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
碳钢和合金钢制紧固件的机械性能第7部分:公称直径为1 mm至10 mm的螺栓和螺钉的扭转试验和最小扭矩

2000-04-03

现行

BS 10/30165716 DC

BS ISO 898-6. Mechanical properties of fasteners made of carbon steel and alloy steel. Part 6. Nuts with specified proof load values. Fine pitch thread
BS ISO 898-6 碳钢和合金钢制紧固件的机械性能 第六部分 具有规定验证载荷值的螺母 细牙螺纹

2010-01-20