1.1 本指南提供了将采集的过程中监测数据转换为一个文件的标准化程序和要求，该文件代表粉末床熔融（PBF）的打印过程，用于质量评估。 1.2 本指南中包含的许多操作说明旨在作为一般概述。他们可能没有提供所需的详细信息。 1.3 本指南涵盖: 1.3.1 数据注册， 1.3.2 提取过程中数据，以及 1.3.3 文件转换和可视化。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 转换后的文件将以特定的结构进行组织，以反映过程中监控数据与打印过程质量之间的关系。 5.2 这种标准文件结构将有助于确保各种打印系统、分析和插图软件之间的数据兼容性。它旨在自我解释并易于使用，以适应大量用户的数据共享。 5.3 转换后的文件可以用于打印质量的评估以及缺陷和异常的检测。

1.1 This guide provides standardized procedures and requirements for converting acquired in-process monitoring data into one file representing the printing process of powder bed fusion (PBF) for quality evaluation. 1.2 Many of the operational descriptions included in this guide are intended as general overviews. They may not present the detailed information required. 1.3 This guide covers: 1.3.1 Data registration, 1.3.2 Extraction of in-process data, and 1.3.3 File conversion and visualization. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 The converted file will be organized in a specific structure to reflect the relationship between the in-process monitoring data with the quality of the printing process. 5.2 This standard file structure will help ensure the data compatibility across various printing systems, analyses, and illustration software. It aims to be self-explaining and easy to use to accommodate data sharing in a large base of users. 5.3 The converted file can be used for the evaluation of printing quality and the detections of defects and anomalies.