首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN ISO 15011-4:2018
到馆提醒
收藏跟踪
购买正版
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases-Fume data sheets 焊接和相关工艺的健康和安全 烟雾和气体取样的实验室方法
发布日期: 2018-03-06
BS EN ISO 15011-4:2018涵盖了焊接和相关工艺的健康和安全。它规定了 为了制备焊接烟尘,测定焊接烟尘的排放率和化学成分 数据表。本规范适用于所有使用手工焊接或部分手工电弧焊进行连接或堆焊的填充材料 机械化或全自动工艺,沉积非合金钢、合金钢和有色金属 合金。手工金属电弧焊、实心焊丝气体保护金属电弧焊、金属芯和 药芯焊丝和自保护药芯焊丝电弧焊均包含在本规范范围内 这份文件。交叉引用:EN 1540EN/TR 14599ISO 15011-1ISO/TR 25901-2ISO/TR 25901-3ISO胶:1993ASTM A283/A283M-03AWS A5。4-2012IEC 60974-7:2005ISO 3581:2016购买本文件时提供的所有当前修订版均包含在购买本文件中。
BS EN ISO 15011-4:2018 covers health and safety in welding and allied processes. It specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare fume data sheets.It applies to all filler materials used for joining or surfacing by arc welding using a manual, partly mechanized or fully automatic process, depositing unalloyed steel, alloyed steel and non-ferrous alloys. Manual metal arc welding, gas-shielded metal arc welding with solid wires, metal-cored and flux-cored wires and arc welding with self-shielded flux-cored wires are included within the scope of this document.Cross References:EN 1540EN/TR 14599ISO 15011-1ISO/TR 25901-2ISO/TR 25901-3ISO GUM:1993ASTM A283/A283M-03AWS A5.4-2012IEC 60974-7:2005ISO 3581:2016All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS EN ISO 15011-3-2009
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases-Determination of ozone emission rate during arc welding
焊接和相关工艺的健康和安全 烟雾和气体取样的实验室方法
2009-11-30
现行
KS B ISO 15011-4
용접 및 관련 공정에서의 안전과 보건 — 용접퓸과 가스 포집을 위한 시험방법 — 제4부: 퓸 데이터 시트
焊接和相关工艺的健康和安全.烟雾和气体取样的实验室方法.第4部分:烟雾数据表
2022-12-19
现行
KS B ISO 15011-4(2017 Confirm)
용접 및 관련 공정에서의 안전과 보건-용접퓸과 가스포집을 위한 시험방법-제4부:퓸 데이터 시트
焊接及相关工艺的健康和安全烟雾和气体取样的实验室方法第4部分:烟雾数据表
2007-11-30
现行
ISO 15011-4-2017
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets
焊接和相关工艺中的健康和安全 - 烟气和气体取样实验室方法 - 第4部分:烟雾数据表
2017-12-08
现行
BS PD CEN ISO/TS 15011-6-2012
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases-Procedure for quantitative determination of fume from resistance spot welding
焊接和相关工艺的健康和安全 烟雾和气体取样的实验室方法
2012-12-31
现行
ISO 15011-3-2009
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 3: Determination of ozone emission rate during arc welding
焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第3部分:弧焊期间臭氧排放率的测定
2009-10-05
现行
BS EN ISO 15011-1-2009
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases-Determination of fume emission rate during arc welding and collection of fume for analysis
焊接和相关工艺的健康和安全 烟雾和气体取样的实验室方法
2009-11-30
现行
ISO/TS 15011-6-2012
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding
焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第6部分:电阻点焊烟雾和气体的定量测定程序
2012-07-11
现行
UNE-EN ISO 15011-4-2007
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2006)
焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第4部分:烟雾数据表(ISO 15011-4-2006)
2007-02-21
现行
KS B ISO 15011-1(2024 Confirm)
용접 및 관련 공정에서의 보건 및 안전 — 퓸 및 가스 샘플링을 위한 시험방법 — 제1부: 아크 용접 시 퓸 배출률의 측정 및 퓸 분석을 위한 수집
焊接和相关工艺中的健康和安全烟气和气体取样的实验室方法第1部分:电弧焊接过程中烟气排放率的测定和烟气分析收集
2019-03-25
现行
KS B ISO 15011-1
용접 및 관련 공정에서의 보건 및 안전 — 퓸 및 가스 샘플링을 위한 시험방법 — 제1부: 아크 용접 시 퓸 배출률의 측정 및 분석용 퓸 수집방법
焊接和相关工艺中的健康与安全 - 烟气和气体取样实验室方法 - 第1部分:电弧焊接和烟气收集分析中烟气排放率的测定
2019-03-25
现行
ISO 15011-1-2009
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis
焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第1部分:弧焊期间烟雾排放率的测定和分析用烟雾的收集
2009-10-05
现行
UNE-EN ISO 15011-3-2010
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)
焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第3部分:电弧焊期间臭氧排放率的测定(ISO 15011-3-2009)
2010-09-29
现行
UNE-EN ISO 15011-1-2010
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第1部分:电弧焊接期间烟雾排放率的测定和分析用烟雾的收集(ISO 15011-1-2009)
2010-09-29
现行
BS EN ISO 15011-2-2009
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases-Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
焊接和相关工艺的健康和安全 烟雾和气体取样的实验室方法
2009-11-30
现行
ISO 15011-2-2009
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第2部分:电弧焊、切割和气刨过程中一氧化碳(CO)、二氧化碳(CO2)、一氧化氮(NO)和二氧化氮(NO2)排放率的测定
2009-10-05
现行
ISO 15011-5-2011
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry
焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第5部分:使用热解气相色谱-质谱法识别焊接或切割全部或部分有机材料组成的产品时产生的热降解产物
2011-09-23
现行
UNE-EN ISO 15011-2-2010
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第2部分:电弧焊、切割和气刨过程中一氧化碳(CO)、二氧化碳(CO2)、一氧化氮(NO)和二氧化氮(NO2)排放率的测定(ISO 15011-2-2009)
2010-09-29
现行
DIN ISO/TS 15011-5
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly and partly of organic materials (ISO/TS 15011-5:2006); German version CEN ISO/TS 15011-5:2006
焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第5部分:焊接或切割全部或部分由有机材料组成的产品时产生的热降解产物的识别(ISO/TS 15011-5-2006);德国版CEN ISO/
2006-06-01