1.1 本消费者安全性能规范规定了性能要求、测试方法和标记要求，以促进在酒店、出租屋、汽车旅馆和儿童保育中心等商业环境中安全使用婴儿床。 1.2 本消费者安全性能规范涵盖了联邦和ASTM标准，当这些产品用于非商业应用时，这些标准适用于这些类型的产品。 1.3 本消费者安全性能规范包括旨在提供安全睡眠环境的产品，如全尺寸婴儿床、非全尺寸婴儿床和游乐场，包括刚性和网侧装置。本标准中使用的术语“婴儿床”包括所有这些项目。 1.4 摇篮和摇篮等产品不包括在本消费者安全性能规范中。 1.5 在本《消费者安全性能规范》批准日期之后生产的商用婴儿床，除非在所有测试之前和之后符合本规范中包含的所有适用要求，否则不得通过标签或其他方式表明符合本规范。 1.6 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.7 以下预防性警告仅适用于试验方法部分第节 6. ，符合本规范。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This consumer safety performance specification establishes performance requirements, test methods, and marking requirements to promote the safe use of cribs in commercial environments such as hotels, rentals, motels, and child care centers and the like. 1.2 This consumer safety performance specification subsumes the federal and ASTM standards which are in existence for these types of product when those products are used in non-commercial applications. 1.3 This consumer safety performance specification includes products intended to provide a safe sleeping environment such as full size cribs, non-full size cribs, and play yards and includes both rigid and mesh sided units. The term “crib” as used in this standard includes all of these items. 1.4 Products such as bassinets and cradles are specifically excluded from this consumer safety performance specification. 1.5 No commercial crib produced after the approval date of this consumer safety performance specification shall, either by label or other means indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test methods portion, Section 6 , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.