现行

DIN EN 2660-DRAFT

Draft Document - Aerospace series - Heat resisting alloy CO-CH1401 - As cast, remelting stock
文件草案.航空航天系列.耐热合金CO-CH1401.铸态重熔坯料

1995-11-01

现行

DIN EN 2161-DRAFT

Draft Document - Aerospace series - Heat resisting alloy CO-CH1401 (CoCr26Ni11W), not heat treated - Precision castings
文件草案.航空航天系列.未经热处理的耐高温合金CO-CH1401（CoCr26Ni11W）.精密铸件

2000-03-01

现行

DIN EN 2657-DRAFT

Draft Document - Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, bar a or D 150 mm; R<(Index)m> 860 MPa
起草文件-航空航天系列-耐热合金CO-PH1402-自耗电极重熔 固溶处理 棒a或D度150mm；R<（指数）m>860 MPa

1995-11-01

现行

DIN EN 2661-DRAFT

Draft Document - Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, sheet and strip a 3 mm; R<(Index)m> 860 MPa
起草文件-航空航天系列-耐热合金CO-PH1402-3 mm度的自耗电极重熔、固溶处理、薄板和带材；R<（指数）m>860 MPa

1995-11-01

现行

DIN EN 2659-DRAFT

Draft Document - Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, forgings D<(Index)e> 100 mm; R<(Index)m> 860 MPa
文件草案-航空航天系列-耐热合金CO-PH1402-自耗电极重熔 固溶处理 锻件D<（索引）e>100 mm；R<（指数）m>860 MPa

1995-11-01

现行

DIN EN 2860-2-DRAFT

Draft Document - Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 2: forging stock
文件草案——航空航天系列；耐热合金；锻造坯料和锻件；技术规范；第2部分:锻坯

1994-04-01

现行

DIN EN 2860-1-DRAFT

Draft Document - Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 1: general requirements
文件草案——航空航天系列；耐热合金；锻造坯料和锻件；技术规范；第1部分:一般要求

1994-04-01

现行

DIN EN 2582-DRAFT

Draft Document - Aerospace series; bolts in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa/730 °C; technical specification
文件草案——航空航天系列；耐高温镍基合金NI-P101HT（Waspaloy）制螺栓；分类:1210 MPa/730°C；技术规格

1990-06-01

现行

DIN EN 2860-3-DRAFT

Draft Document - Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings
文件草案——航空航天系列；耐热合金；锻造坯料和锻件；技术规范；第3部分:预生产和生产锻件

1994-04-01

现行

DIN EN 3640-DRAFT

Draft Document - Aerospace series; test methods; heat resisting alloys atomized powder; procedure for the inspection of loose powder cleannes by water elutriation
文件草案——航空航天系列；试验方法；耐热合金雾化粉末；水淘洗法检查松散粉末清洁剂的程序

1992-11-01

现行

DIN EN 3641-DRAFT

Draft Document - Aerospace series; test methods; heat resisting alloys compacted material; procedure for quantitative determination of Thermally Induced Porosity (T.I.P.)
文件草案——航空航天系列；试验方法；耐热合金；压实材料；热致孔隙度（T.I.P.）的定量测定程序

1992-10-01

现行

DIN EN 2233-DRAFT

Draft Document - Aerospace series - Heat resisting alloy Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3), vacuum melted, non heat treated - Precision casting, a or D 50 mm
文件草稿.航空航天系列.真空熔炼非热处理耐高温合金Ni-CD1701（NiCo15Cr10Al6Ti5Mo3）.精密铸造 a或D50mm

1999-05-01

现行

DIN EN 2184-DRAFT

Draft Document - Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9), solution treated - Bar and section, D<(Index)e> 200 mm
文件草稿.航空航天系列.固溶处理的耐高温合金NI-PH2301（NiCr21Fe18Mo9）.棒材和型材 D<（索引）e>度200mm

1999-05-01

现行

DIN EN 2662-DRAFT

Draft Document - Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) annealed - Sheet, strip and plate, 0.2 mm a 10 mm
文件草稿.航空航天系列.退火的耐高温合金NI-PH3601（NiCr22Mo9Nb）.0.2 mm a级10 mm薄板 带材和板材

1998-05-01

现行

DIN EN 2183-DRAFT

Draft Document - Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9), solution treated - Hand and die forgings, D<(Index)e> 200 mm
文件草稿.航空航天系列.固溶处理的耐高温合金NI-PH2301（NiCr21Fe18Mo9）.手工和模锻 D<（索引）e>200mm

1999-05-01

现行

DIN EN 2185-DRAFT

Draft Document - Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9), solution treated - Sheet, strip and plate, 0.2 mm a 10 mm
文件草稿.航空航天系列.固溶处理的耐高温合金NI-PH2301（NiCr21Fe18Mo9）.0.2mm a度10mm的薄板 带材和板材

1999-05-01

现行

DIN EN 2202-DRAFT

Draft Document - Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al), solution treated - Seamless tubes, D 50 mm, a 3 mm
文件草稿.航空航天系列.固溶处理的耐高温合金NI-PH1303（NiCo20Cr20Mo5Ti2Al）.D度50mm a度3mm的无缝管

1999-05-01

现行

DIN EN 2663-DRAFT

Draft Document - Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Sheet, strip and plate, 0.2 mm a 10 mm
文件草稿.航空航天系列.经固溶处理的耐高温合金NI-PH3601（NiCr22Mo9Nb）.0.2mm a度10mm的薄板、带材和板材

1998-05-01

现行

DIN EN 3771-DRAFT

Draft Document - Aerospace series - Nuts, bihexagonal, plain, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
文件草稿.航空航天系列.MoS润滑的耐热钢制普通双六角螺母.等级:1100MPa（环境温度）/315°C

1999-07-01

现行

DIN EN 3225-1-DRAFT

Draft Document - Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 1: general requirements
文件草案——航空航天系列；由雾化粉末、粉末、压实锻坯和零件制成的耐热合金；技术规范；第1部分:一般要求

1994-04-01