首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM F793/F793M-15
到馆提醒
收藏跟踪
购买正版
Standard Classification of Wall Coverings by Use Characteristics 墙体使用特性的标准分类
发布日期: 2015-12-15
1.1 该分类涵盖了按使用特征对墙面覆盖物的分类,即根据其在使用中的可用性,认识到某些墙面覆盖物主要是为了装饰效果而设计的,而其他墙面覆盖物也旨在实现高可用性。 1.1.1 该分类适用于所有墙面覆盖物,但某些章节特别适用于乙烯基涂层墙面覆盖材料。 1.2 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值不一定是精确的等价物;因此,每个系统应相互独立使用。将两个系统的值结合起来可能会导致不符合标准。 1.3 本标准用于测量和描述材料、产品或组件在受控条件下的加热和燃烧性能,但其本身并不包括在实际火灾条件下对材料、产品或组件进行火灾危险或火灾风险评估所需的所有因素。 1.4 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 ====意义和用途====== 4.1 这种分类提供了标准,根据这些标准,可以为特定的住宅和商业装饰应用选择具有适当使用特性的墙面覆盖物。
1.1 This classification covers the classification of wall coverings by use characteristics, that is, according to their serviceability in use, recognizing that certain wall coverings are designed primarily for decorative effect, while other wall coverings are also designed to achieve a high degree of serviceability. 1.1.1 This classification applies to all wall coverings but some sections apply specifically to vinyl-coated wall covering materials. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems has the potential to result in non-conformance with the standard. 1.3 This standard is used to measure and describe the properties of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== 4.1 This classification provides criteria by which wall coverings of appropriate use characteristics can be chosen for particular residential and commercial decorating applications.
分类信息
关联关系
研制信息
归口单位: F15.15
相似标准/计划/法规
现行
ASTM F793/F793M-20
Standard Classification of Wall Coverings by Use Characteristics
墙体使用特性的标准分类
2020-10-01
现行
ASTM E1740-24
Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
用锥形量热计测定墙面覆盖层或天花板覆盖层复合材料的热释放率和其他耐火试验响应特性的标准试验方法
2024-10-01
现行
BS 5442-2-1989
Classification of adhesives for construction-Classification of adhesives for use with interior wall and ceiling coverings (excluding decorative flexible materials in roll form)
建筑用胶粘剂的分类 内墙和天花板覆盖物用粘合剂分类(不包括卷状装饰性柔性材料)
1989-10-31
现行
ASTM D8484-23
Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
用作外墙覆盖物的塑料木材材料和木塑复合材料的标准规范
2023-05-01
现行
ASTM E154/E154M-08a(2019)
Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
在混凝土板下、墙壁上或作为地面覆盖物与地面接触的水蒸气缓凝剂的标准试验方法
2019-07-01
现行
ASTM E2404-22
Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics
评估表面燃烧特性的纺织品、纸或聚合物(包括乙烯基)和木墙或天花板覆盖物、饰面和饰面的样品制备和安装的标准实施规程
2022-12-01
现行
ETSI EN 302 435-2
ERM; Short Range Devices; Technical characteristics for SRD equipment using Ultra WideBand technology; Building Material Analysis & Classification equipment apps operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering essential reqs of article 3.2 of R&TTE Directive
呃;短程设备;采用超宽带技术的SRD设备的技术特性;在2.2 GHz至8.5 GHz频带内运行的建筑材料分析和分类设备应用程序;第2部分:包含R&TTE指令第3.2条基本要求的协调欧洲标准
2009-12-01
现行
DIN EN 302498-2
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2.2 GHz to 8.5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English version EN 302498-2 V1.1.1 (2010-06) as German standard)
电磁兼容性和无线电频谱管理(ERM).短程设备(SRD).使用超宽带技术(UWB)的SRD设备的技术特性.在2.2GHz频带内工作的电动工具设备的目标识别和特性描述应用
2010-10-01