1.1 本指南涵盖了油漆、油漆、清漆和相关产品制造中使用的挥发性溶剂的采样和测试程序。试验方法见 表1 . 1.2 有关具体的危险信息和指导，请参阅本指南中所列材料的供应商材料安全数据表。 1.3 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 简要讨论了每种试验方法，旨在帮助用户选择最适用的程序，其中有多个可用程序。

1.1 This guide covers procedures for the sampling and testing of volatile solvents used in the manufacture of paint, lacquer, varnish, and related products. The test methods are listed in Table 1 . 1.2 For specific hazard information and guidance, see Suppliers' Material Safety Data Sheet for materials listed in this guide. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 A brief discussion of each test method is given with the intent of helping the user in the selection of the most applicable procedure where more than one is available.