本文件规定了控制设备的模拟控制接口，该接口具有控制控制设备输出的功能。控制设备的输出由控制设备电流源的电压控制装置控制在最小/关闭和最大值之间。 本文件未规定控制设备模拟接口的安全要求。安全要求见IEC 61347（所有部分）。交叉引用:EN 62384IEC 62756-1EN IEC 62386IEC 60050-845EN 60929IEC 61347-2-2EN 62717EN 62811EN 61347-2-12IEC 61167IEC 61047EN 61347-2-3IEC 60901IEC 60929IEC 62384EN 61347-1EN 61167EN 61347-2-2IEC 61347-2-13EN 61047IEC 61347-2-12EN 61347IEC 61347IEC 61347-1EN 62756-1IEC 61347IEC 61347-1IEC 61347-1IEC 61347IEC 61347-2-3IEC 6161817IEC 62817IEC 61347IEC 61347IEC 61347IEC 61347-2-2-1IEC 62817IEC 62817IEC 6161616161347-2-1IEC 61616161717IEC 6161347-2-1IEC 6161购买时间包含在购买本文件中。

This document specifies the analogue control interface of controlgear which has the function of controlling the output of the controlgear. The output of the controlgear is controlled between minimum/off and maximum values by the voltage control device sinking the controlgear current source. This document does not specify safety requirements for the analogue interface of controlgear. Safety requirements are given in IEC 61347 (all parts).Cross References:EN 62384IEC 62756-1EN IEC 62386IEC 60050-845EN 60929IEC 61347-2-2EN 62717EN 62811EN 61347-2-12IEC 61167IEC 61047EN 61347-2-3IEC 60901IEC 60929IEC 62384EN 61347-1EN 61167EN 61347-2-2IEC 61347-2-13EN 61047IEC 61347-2-12EN 61347IEC 61347-1EN 62756-1IEC 60081IEC 61347IEC 61347-2-3IEC 62811EN 60901ISO 2859-1IEC 62717EN 60081EN 61347-2-13IEC 62386All current amendments available at time of purchase are included with the purchase of this document.