本SAE航空航天推荐规程(ARP)包含用于测量机载电子平板显示器(FPD)系统光学性能的方法。所描述的方法特定于在飞机飞行甲板上使用的直视液晶矩阵(x-y可寻址)显示技术。本文档的重点是有源矩阵液晶显示器（LCD）。大多数过程可以应用于其他显示技术，然而，需要注意的是，一些技术需要适合于不同的显示技术。 该文件涵盖了可见光光谱（波长范围为380至780 nm）内透射模式下的单色和彩色LCD操作。这些程序适用于特别注意光源照明几何形状的反射型和透反射型显示器。机载直视CRT（阴极射线管）显示器的光度和比色测量程序见ARP1782。机载平视显示器（HUD）的光学测量程序可在ARP5287中找到。 通常，程序描述手动单点测量。各个程序可以容易地结合到自动化测试设备(ATE)或其他自动化环境中。这也包括但不限于傅立叶示波器和视频成像设备。 本报告由SAE发布，旨在促进技术和工程科学的发展。本技术报告的使用完全是自愿的，其对任何特定用途的适用性和适用性，包括由此产生的任何专利侵权，由用户全权负责。

This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical performance of airborne electronic flat panel display (FPD) systems. The methods described are specific to the direct view, liquid crystal matrix (x-y addressable) display technology used on aircraft flight decks. The focus of this document is on active matrix, liquid crystal displays (LCD). The majority of the procedures can be applied to other display technologies, however, it is cautioned that some techniques need to be tailored to different display technologies. The document covers monochrome and color LCD operation in the transmissive mode within the visual spectrum (the wavelength range of 380 to 780 nm). These procedures are adaptable to reflective and transflective displays paying special attention to the source illumination geometry. Photometric and colorimetric measurement procedures for airborne direct view CRT (cathode ray tube) displays are found in ARP1782. Optical measurement procedures for airborne head up displays (HUDs) can be found in ARP5287. Generally, the procedures describe manual single point measurements. The individual procedures may be readily incorporated into automated testing equipment (ATE) or other automated environments. This also includes, but is not limited to Fourier scopes and video imaging devices. This report is published by SAE to advance the state of technical and engineering sciences. The use of this Technical Report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.