首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D331-11(2019)
到馆提醒
收藏跟踪
购买正版
Standard Specification for 2-Ethoxyethanol<sup>,</sup> 2-乙氧基乙醇的标准规范
发布日期: 2019-04-01
1.1 本规范涵盖2-乙氧基乙醇。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 以下内容适用于本标准中的所有规定限值:为了确定是否符合本标准,应根据修约实践方法,将观察值或计算值修约到用于表示规范限值的最后一个右手数字中的“最接近的单位” E29年 . 1.4 有关危险信息和指南,请参阅供应商的材料安全数据表。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers 2-ethoxyethanol. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheets. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D01.35
相似标准/计划/法规
现行
ASTM D1719-11(2019)
Standard Specification for Isobutyl Alcohol,
异丁醇的标准规范
2019-04-01
现行
ASTM D2694-05(2019)
Standard Specification for Diethylene Glycol,
二甘醇的标准规范
2019-04-01
现行
ASTM D770-11(2019)
Standard Specification for Isopropyl Alcohol,
异丙醇的标准规范
2019-04-01
现行
ASTM D740-11(2019)
Standard Specification for Methyl Ethyl Ketone,
甲乙酮的标准规范
2019-04-01
现行
BS 6F 37-1990
Specification for 570 g/m2 and 640 g/m2 cotton canvas fabrics for aerospace purposes
航空航天用570 g/m2和640 g/m2棉帆布织物规范
1990-10-31
现行
BS 6F 55-1991
Specification for 345 g/m2 and 415 g/m2 cotton canvas fabrics suitable for aerospace purposes
航空航天用345 g/m^2和415 g/m^2棉帆布织物规范
1991-01-31
现行
ASTM F3458-21
Standard Specification for Marketing, Packaging, and Labeling Adult Magnet Sets Containing Small, Loose, Powerful Magnets (with a Flux Index ≥50 kG2 mm2)
含有小的、松散的、强大的磁铁(具有通量指数)的成人磁铁组的营销、包装和标签的标准规范≥50 千克2 毫米2
2021-02-15
现行
BS HC 1-1973
Specification for carbon steel castings (500 N/mm2)
碳钢铸件规范(500 N/mm^2)
1973-03-09
现行
BS 3F 114-1995
Specification for 80 g/m2 cotton madapolam fabric
80g/m2棉马达波兰织物规范
1995-06-15
现行
BS HC 2-1973
Specification for carbon-manganese steel castings (550 N/mm2)
碳锰钢铸件规范(550 N/mm^2)
1973-03-09
现行
ASTM F2453/F2453M-14(2019)
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2  [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
6 in.2和#x2009网格用焊接钢丝网围栏织物(金属涂层或聚合物涂层)的标准规范[3871 mm2]或更小 在面板或卷中 具有均匀的网格
2019-05-01
现行
ASTM F2919/F2919M-12(2018)
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
面板中具有可变网格图案或大于6 in.2[3871 mm2]网格的焊接钢丝网围栏织物(金属涂层或聚合物涂层)的标准规范
2018-03-01
现行
ASTM D1007-11(2019)
Standard Specification for sec-Butyl Alcohol,
丁醇的标准规范
2019-04-01
现行
BS S 139-1968
Specification for 1½ per cent nickel-chromium-molybdenum steel (110/130 kgf/mm2 (70/83 tonf/in2): limiting ruling section 70 mm (2¾ in))
1 1/2%镍铬钼钢规范(110/130 kgf/mm^2(70/83 tonf/in^2):限制截面70 mm(2 3/4 in))
1968-04-17
现行
BS 2A 229-1972
Specification for hexagonal head steel bolts 160000 lbf/in2 (1100/MPa)
160000 lbf/in2(1100/MPa)六角头钢螺栓规范
1972-09-12
现行
IEC 61577-2-2014
Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
辐射防护仪器氡和氡衰变产物测量仪器第2部分:氡和氡测量仪器的特殊要求
2014-07-10
现行
ASTM C1462-21
Standard Specification for Uranium Metal Enriched to Less Than 20 % 235U
浓缩至20%以下的金属铀标准规范 % 235U
2021-10-01
现行
BS ISO/IEC 23360-3-3-2021
Linux Standard Base (LSB)-Desktop specification for IA64 (Itanium TM) architecture
Linux标准库(LSB)
2021-10-29
现行
BS S 141-1968
Specification for 12 per cent chromium corrosion-resisting steel (60/80 kgf/mm2 (38/51 tonf/in2): limiting ruling section 150 mm (6in))
12%铬耐蚀钢规范(60/80 kgf/mm^2(38/51 tonf/in^2):限制截面150 mm(6 in))
1968-04-17
现行
BS 4A 228-1997
Specification for steel double hexagon bolts. 1250 MPa (180,000 lbf/in2) for aircraft
钢制双六角螺栓规范 飞机1250兆帕(180000磅/平方英寸)
1997-06-15