首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 60204-32:2023 CMV
到馆提醒
收藏跟踪
购买正版
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines 机械安全.机械电气设备.第32部分:起重机械的要求
发布日期: 2023-07-04
IEC 60204-32:2023 CMV包含官方标准及其注释版本。注释版本为您提供了一种快速简单的方法来比较IEC 60204-32:2023版3.0和之前的IEC 60204-32:2023:2008版2.0之间的所有更改。此外,还提供了IEC TC 44专家的意见,以解释最相关变更的原因,或澄清内容的任何部分。 IEC 60204-32:2023适用于起重机械及相关设备的电气、电子、可编程电子设备和系统,包括一组以协调方式协同工作的起重机械。本文件涵盖的设备从电源与起重机电气设备的连接点(起重机电源开关)开始,包括位于起重机外部的电源和控制馈线的系统,例如柔性电缆或导线或导体棒。本文件适用于线路间不超过1 000 V交流电或1 500 V直流电且标称频率不超过200 Hz的设备或设备部件。本文件不涵盖其他标准或法规为保护人员免受电气危险以外的危险而需要或要求的所有要求(例如防护、联锁或控制)。每种类型的起重机械都有独特的要求,以提供足够的安全性。本文件不涵盖噪音风险。附加和特殊要求可适用于起重机械的电气设备,包括 -处理或运输潜在爆炸性材料(如油漆或锯屑); -预期用于潜在爆炸性和/或易燃环境;-在运输或移动某些材料时具有特殊风险; -拟用于矿场。 就本文件而言,起重机械包括所有类型的起重机、所有类型的绞车以及储存和取回机械。包括以下产品组: -桥式起重机; -移动式起重机; -塔式起重机; -回转变幅起重机; -龙门起重机; -海上起重机; -浮吊; -所有类型的绞车; -升降机及附件; -装载机起重机; -缆索起重机; -负载保持装置; -储存和取回机器; -单轨起重机; -跨运车; -橡胶轮胎龙门起重机(RTG)。 本文件不涵盖电气设备的单个项目,除了其使用选择和安装。 IEC 60204-32:2023取消并取代了2008年发布的第二版。本版构成技术修订版。 与上一版相比,此版本包括以下重大技术变更: a)与IEC 60204-1第六版(2016)保持一致,特别是: -接地和连接的要求; -电路保护的要求; -考虑使用动力驱动系统; -保护性粘合要求和术语; -关于PDS的安全转矩关闭、紧急停止和控制电路保护的要求; -控制装置的致动器的符号; b)高压电气设备参考; c)无缆控制系统要求; d)EMC要求; e)技术文件要求; f)对当前特殊国情、规范标准和参考书目的一般更新。
IEC 60204-32:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60204-32:2023 edition 3.0 and the previous IEC 60204-32:2023:2008 edition 2.0. Furthermore, comments from IEC TC 44 experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content.

IEC 60204-32:2023 applies to electrical, electronic, programmable electronic equipment and systems to hoisting machines and related equipment, including a group of hoisting machines working together in a co-ordinated manner. The equipment covered by this document commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) and includes systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars. This document is applicable to equipment or parts of equipment not exceeding 1 000 V AC or 1 500 V DC between lines and with nominal frequencies not exceeding 200 Hz. This document does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of hoisting machine has unique requirements to be accommodated to provide adequate safety. This document does not cover noise risks. Additional and special requirements can apply to the electrical equipment of hoisting machines including those that
– handle or transport potentially explosive material (e.g. paint or sawdust);
– are intended for use in potentially explosive and/or flammable atmospheres;
– have special risks when transporting or moving certain materials;
– are intended for use in mines.
For the purposes of this document, hoisting machines include cranes of all types, winches of all types and storage and retrieval machines. The following product groups are included:
– overhead travelling cranes;
– mobile cranes;
– tower cranes;
– slewing luffing cranes;
– gantry cranes;
– offshore cranes;
– floating cranes;
– winches of all types;
– hoists and accessories;
– loader cranes;
– cable cranes;
– load holding devices;
– storage and retrieval machines;
– monorail hoists;
– straddle carriers;
– rubber tyred gantry cranes (RTGs).
This document does not cover individual items of electrical equipment other than their selection for use and their erection.
IEC 60204-32:2023 cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment to the IEC 60204-1 sixth edition (2016) especially for:
– requirements for earthing and bonding;
– requirements for circuit protection;
– consideration of use of Power Drive Systems;
– protective bonding requirements and terminology;
– requirements pertaining to safe torque off for PDS, emergency stop, and control circuit protection;
– symbols for actuators of control devices;
b) reference for high voltage electrical equipment;
c) cableless control system requirements;
d) EMC requirements;
e) technical documentation requirements;
f) general updating to current special national conditions, normative standards, and bibliographical references.
分类信息
关联关系
研制信息
归口单位: TC 44
相似标准/计划/法规
现行
GB/T 5226.32-2017
机械电气安全 机械电气设备 第32部分:起重机械技术条件
Electrical safety of machinery—Electrical equipment of machines—Part 32: Requirements for hoisting machines
2017-12-29
现行
KS C IEC 60204-32
기계류의 안전 — 기계의 전기 장비 — 제32부: 호이스트에 대한 요구사항
机械安全机械电气设备第32部分:起重机械要求
2023-11-16
现行
JIS B 9960-32-2011
Safety of machinery -- Electrical equipment of machines -- Part 32: Requirements for hoisting machines
机械安全机械电气设备第32部分:起重机械的要求
2011-01-01
现行
UNE-EN 60204-32-2009
Safety of machinery - Electrical equipment of machines -- Part 32: Requirements for hoisting machines
机械安全机械电气设备第32部分:起重机械要求
2009-06-24
现行
UNE-EN 60204-32-2001
SAFETY OF MACHINERY. ELECTRICAL EQUIPMENT OF MACHINES. PART 32: REQUIREMENTS FOR HOISTING MACHINES.
机械安全 机器的电气设备 第32部分:起重机械的要求
2001-06-19
现行
IEC 60204-32-2023
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
机械安全.机械电气设备.第32部分:起重机械的要求
2023-07-04
现行
AS 5230-2021
Safety of machinery - Electrical equipment of machines, Part 32: Requirements for hoisting machines (IEC 60204-32:2008 (ED.2.0) MOD)
机械安全.机械电气设备.第32部分:起重机械的要求(IEC 60204-32-2008(ED.2.0)MOD)
2021-01-29
现行
DIN EN 60204-32
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:2008); German version EN 60204-32:2008
机械安全.机械电气设备.第32部分:起重机械的要求(IEC 60204-32-2008);德文版EN 60204-32:2008
2009-03-01
现行
IEC 60204-2024 SER
Safety of machinery - Electrical equipment of machines - ALL PARTS
机械安全.机械电气设备.所有零件
2013-04-23
现行
IEC 60204-2025 SER
Safety of machinery - Electrical equipment of machines - ALL PARTS
机械安全.机械电气设备.所有零件
2013-04-23
现行
GB 5226.6-2014
机械电气安全 机械电气设备 第6部分:建设机械技术条件
Electrical safety of machinery―Electrical equipment of machines―Part 6: Requirements for construction machinery
2014-05-06
现行
GB/T 5226.34-2020
机械电气安全 机械电气设备 第34部分:机床技术条件
Electrical safety of machinery—Electrical equipment of machines—Part 34: Requirements for machine tools
2020-04-28
现行
IEC TS 60204-34-2016
Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools
机械安全.机械电气设备.第34部分:机床要求
2016-08-09
现行
GB/T 5226.1-2019
机械电气安全 机械电气设备 第1部分:通用技术条件
Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
2019-06-04
现行
KS C IEC 60204-1
기계류의 안전성 — 기계의 전기 장비 — 제1부: 일반 요구사항
机械安全 - 机器电气设备 - 第1部分:一般要求
2021-01-15
现行
IEC 60204-1-2016
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
机械安全 - 机器电气设备 - 第1部分:一般要求
2016-10-13
现行
IEC 60204-1-2016+AMD1-2021 CSV
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
机械安全.机械电气设备.第1部分:一般要求
2021-09-15
现行
IEC 60204-1-2016 RLV
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
机械安全.机械电气设备.第1部分:一般要求
2016-10-13
现行
JIS B 9960-33-2012
Safety of machinery -- Electrical equipment of machines -- Part 33: Requirements for semiconductor fabrication equipment
机械安全机械电气设备第33部分:半导体制造设备要求
2012-01-01
现行
IEC 60204-33-2009
Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
机械安全 - 机器电气设备 - 第33部分:半导体制造设备的要求
2009-12-10