1.1目的本规程规定了新安装电气设备和设施现场检查和测试的最低要求。1.2范围本规程描述了新电气设备和系统安装后的检查和测试程序。本规程提供了试验结果的最低可接受值，以及记录检验和试验值的表格。某些专用设备和成套设备是特定于应用的，不在本规程范围内。一些检查和测试可能需要独立的测试机构或设备制造商代表。本规程没有规定哪些测试需要第三方，也没有指定获取和协调这些第三方的责任。 如果需要，这些试验应在项目范围内定义。本规程不包括各种规范和法规要求的全面合规性检查，但提供了设备完整性和项目特定文件合规性的保证。

1.1 PurposeThis Practice provides the minimum requirements for field inspection and testing of new, installed electrical equipment and facilities.1.2 ScopeThis Practice describes the inspection and testing procedures for new electrical equipment and systems after installation. This Practice provides minimum acceptable values for the testing results and forms for recording inspection and test values.Certain specialty equipment and packaged equipment are application specific and are not covered by this Practice.Some inspections and tests may require an independent testing organization or an equipment manufacturer's representative. This Practice does not specify which tests require a third party or designate responsibility for obtaining and coordinating these third parties. These tests, if required, shall be defined in the project scope.This Practice does not cover full compliance inspections required by various codes and regulations but does provide assurance of equipment integrity and compliance with project-specific documents.