ISO 13628-10:2005定义了按照统一的标准和标准设计和制造的安全，尺寸和功能上可互换的粘结柔性管的技术要求。关于粘合软管的设计，材料选择，制造，测试，标记和包装，参照现有规范和标准规定了最低要求。 ISO 13628-10:2005适用于粘结柔性管组件，由柔性管体段组成，末端配件连接到两端。 ISO 13628-10:2005适用于设计压力大于或等于1.5 MPa（15 bar）的管道。 ISO 13628-10:2005可用于较低设计压力管道，尽管这些管道的要求尚未得到专门的解决。 ISO 13628-10:2005不包括柔性管道的无粘结结构，也不包括柔性管道辅助部件，不适用于柔性管道用于扼流线和杀线应用。 ISO 13628-10:2005可以应用于包括非金属加强层的柔性管，尽管没有努力解决该产品的具体和独特的技术方面，以及包括材料或层结构的粘结施工管这在ISO 13628-2中有所体现

ISO 13628-10:2005 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of bonded flexible pipes, with reference to existing codes and standards where applicable. ISO 13628-10:2005 applies to bonded flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. ISO 13628-10:2005 applies to pipes with a design pressure greater than or equal to 1,5 MPa (15 bar). ISO 13628-10:2005 can be used for lower design pressure pipes, though the requirements of these pipes have not been specifically addressed. ISO 13628-10:2005 does not cover flexible pipes of unbonded structure nor to flexible pipe ancillary components and does not apply to flexible pipes for use in choke and kill line applications. ISO 13628-10:2005 can be applied to flexible pipes that include non-metallic reinforcing layers, though no effort was made to address the specific and unique technological aspects of this product, and to a bonded construction pipe that includes a material or layer construction that is covered in ISO 13628-2. ISO 13628-10:2005 can be applied to flexible pipes for pile hammer, gas flare, water supply and jetting applications, though no effort was made to address the specific and unique technological aspects relating to each of these requirements.