现行

GB/T 1766-2008

色漆和清漆 涂层老化的评级方法
Paints and varnishes - Rating schemes of degradation of coats

2008-06-04

现行

BS EN ISO 4628-3-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Assessment of degree of rusting
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定

2016-02-29

现行

BS EN ISO 4628-2-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Assessment of degree of blistering
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定

2016-02-29

现行

BS EN ISO 4628-4-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Assessment of degree of cracking
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定

2016-02-29

现行

BS EN ISO 4628-10-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Assessment of degree of filiform corrosion
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定 丝状腐蚀程度的评估

2017-03-31

现行

BS EN ISO 4628-1-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-General introduction and designation system
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定

2016-02-29

现行

BS EN 16492-2014

Paints and varnishes. Evaluation of the surface disfigurement caused by fungi and algae on coatings
油漆和清漆 真菌和藻类对涂层表面损伤的评价

2014-06-30

现行

BS EN ISO 4628-7-2016

Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Assessment of degree of chalking by velvet method
油漆和清漆 涂层降解的评估 缺陷数量和大小以及外观均匀变化强度的指定

2016-02-29

现行

KS M ISO 4628-5

도료와 바니시－도막의 노화 평가－결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법－제5부：플레이크 등급 평가
色漆和清漆涂层劣化的评定缺陷数量、大小和外观均匀变化强度的测定第5部分:剥落程度的评定

2017-12-27

现行

KS M ISO 4628-3

도료와 바니시 — 도막의 노화 평가 — 결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법 — 제3부: 녹 등급 평가
涂料和清漆 - 涂料降解评估 - 缺陷数量和尺寸的指定以及外观均匀变化的强度 - 第3部分:生锈程度评估

2018-12-26

现行

KS M ISO 4628-4

도료와 바니시 — 도막의 노화 평가 — 결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법 — 제4부: 균열 등급 평가
涂料和清漆 - 涂料降解评估 - 缺陷数量和尺寸的指定以及外观均匀变化的强度 - 第4部分:破裂度的评估

2018-12-26

现行

KS M ISO 4628-2

도료와 바니시－도막의 노화 평가－결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법－제2부：부풂 등급 평가
色漆和清漆涂层劣化的评定缺陷数量、大小和外观均匀变化强度的测定第2部分:起泡程度的评定

2016-12-19

现行

KS M ISO 4628-2

도료와 바니시 — 도막의 노화 평가 —결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법 — 제2부: 부풂 등급 평가
色漆和清漆.涂层降解的评估.缺陷数量和大小以及外观均匀变化强度的指定.第2部分:起泡程度的评估

2021-12-21

现行

KS M ISO 4628-5(2022 Confirm)

도료와 바니시－도막의 노화 평가－결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법－제5부：플레이크 등급 평가
色漆和清漆-涂层降解的评定-缺陷数量和大小以及外观均匀变化强度的指定-第5部分:剥落程度的评定

2017-12-27

现行

KS M ISO 4628-3(2023 Confirm)

도료와 바니시 — 도막의 노화 평가 — 결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법 — 제3부: 녹 등급 평가
色漆和清漆涂层降解的评定缺陷数量和大小以及外观均匀变化强度的指定第3部分:锈蚀程度的评定

2018-12-26

现行

KS M ISO 4628-4(2023 Confirm)

도료와 바니시 — 도막의 노화 평가 — 결함의 양과 크기 및 겉모양의 균일한 변화 정도 표시 방법 — 제4부: 균열 등급 평가
色漆和清漆涂层降解的评定缺陷数量和大小以及外观均匀变化强度的指定第4部分:开裂程度的评定

2018-12-26

现行

ISO 4628-4-2016

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
涂料和清漆 - 涂料降解评估 - 缺陷数量和尺寸的指定以及外观均匀变化的强度 - 第4部分:破裂度的评估

2016-01-12

现行

ISO 4628-2-2016

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
涂料和清漆 - 涂料降解评估 - 缺陷数量和尺寸的指定以及外观均匀变化的强度 - 第2部分:起泡程度的评估

2016-01-12

现行

GB/T 30789.4-2015

色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第4部分：开裂等级的评定
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 4: Assessment of degree of cracking

2015-07-03

现行

GB/T 30789.5-2015

色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第5部分：剥落等级的评定
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 5: Assessment of degree of flaking

2015-07-03