前言这是CSA P.5的第三版，测量家用燃气干衣机每周期能耗、能量因数和低功率模式能耗的试验方法。它取代了1997年和1993年出版的前两个版本，标题为《测量家用燃气干衣机每周期能耗和能量因数的测试方法》。范围1。1本标准规定了测量每循环能耗的试验方法，以及确定低功率家用燃气干衣机能量因数所需的计算方法。1.2本标准适用于住宅应用中使用的紧凑型和标准型气体干衣机。1.3本标准不适用于家用燃气干衣机的结构和性能安全。 注:施工和性能安全在ANSI Z21中有说明。5.1/CSA 7.1.1.4在CSA标准中，“应”用于表示要求，即用户有义务满足的条款，以符合标准；“应该”用于表示建议或建议但不需要的建议；“可”用于表示一种选择或在标准范围内允许的选择；“can”用来表示可能性或能力。注释随附条款不包括要求或替代要求；随附条款的注释的目的是将解释性或信息性材料与文本分开。表和图的注释被视为表或图的一部分，可以作为要求编写。 方程式和图表的图例被视为要求。附件被指定为规范性（强制性）或信息性（非强制性）以定义其应用。

PrefaceThis is the third edition of CSA P.5, Test method for measuring per-cycle energy consumption, energy factor, and low power mode energy consumption of residential gas clothes dryers. It supersedes the previous editions, published in 1997 and 1993 under the title Testing Method for Measuring Per-Cycle Energy Consumption and Energy Factor of Domestic Gas Clothes Dryers.Scope1.1This Standard specifies the test method to measure per-cycle energy consumption and the calculations required to determine the energy factor of low power residential gas clothes dryers.1.2This Standard applies to compact size and standard size gas clothes dryers for use in residential applications.1.3This Standard does not apply to the construction and performance safety of residential gas clothes dryers.Note: Construction and performance safety are addressed in ANSI Z21.5.1/CSA 7.1.1.4In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the Standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Legends to equations and figures are considered requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.