IEC 62006:2010定义了小型水力发电装置中发电机械现场验收试验的试验、测量方法和合同保证条件。它适用于包含单位功率高达约15 MW、参考直径约3 m的脉冲或反动涡轮机的装置。从动发电机可以是同步或异步类型的。本国际标准包含水轮机验收所需的大多数试验的信息，如安全批准试验、试运行和可靠性试验，以及气蚀、噪声和振动条件的验证（如果需要）。本标准代表了小型水力发电装置中使用的典型方法，分为以下三类:A类:默认，正常测试程序（面板测量），以确定安装的最大输出。 B级:推荐的扩展测试程序，用于确定安装的性能特征。 C级:可选的综合测试程序，以确定安装的绝对效率。 所有类别都包含安全测试、试运行测试和可靠性测试。本标准为合同提供了所有必要的参考，以便执行测试、评估、计算结果并将结果与所有A、B和C类的保证进行比较。

IEC 62006:2010 defines the test, the measuring methods and the contractual guarantee conditions for field acceptance tests of the generating machinery in small hydroelectric power installations. It applies to installations containing impulse or reaction turbines with unit power up to about 15 MW and reference diameter of about 3 m. The driven generator can be of synchronous or asynchronous type. This International Standard contains information about most of the tests required for acceptance of the hydraulic turbine such as safety approval tests, trial operating and reliability tests, as well for verification of cavitation, noise and vibration conditions, if required. This standard represents the typical methods used on smaller hydroelectric installations, and is divided into three classes as follows:
Class A: Default, normal test program (panel measurement), to determine the maximum output of the installation.
Class B: Recommended, extended test program, to determine the performance characteristics of the installation.
Class C: Optional, comprehensive test program, to determine the absolute efficiency of the installation.
All classes contain safety tests, trial operating tests, and reliability tests. This standard gives all necessary references for the contract in order to execute the test, evaluate, calculate and compare the result to the guarantee for all the classes A, B and C.