NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
几何参数的验证——“不合格”螺纹量规件.第1部分:公称直径为1mm至40mm的ISO通用公制螺纹用“不合格”车间量规、基准量规和定位量规

2000-01-01

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹量规件-第2部分:“不合格”车间量规 ISO通用米制螺纹公称直径超过40mm至200mm的检查和设置塞规

2001-12-01

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹量规件.第2部分:ISO通用公制螺纹公称直径大于40mm小于200mm的“GO”车间量规、检查和设置量规件

2001-12-01

Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹量规件-第3部分:精密机械用公称直径超过40mm至250mm的ISO公制螺纹的“不合格”车间量规和检查塞规

2001-12-01

Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹量规件.第3部分:精密工程用公称直径超过40mm至250mm的ISO公制螺纹的“GO”车间量规和检查塞规

2001-12-01

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第2部分:“不合格”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹塞规.第2部分:“GO”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规范（GPS）-“GO”螺纹塞规.第1部分:“GO”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹用塞规的检查和设置

2001-12-01

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“不合格”车间塞规和止回塞规

2001-12-01

Geometrical product specifications (GPS) - GO workshop screw plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“GO”车间塞规和止回塞规

2001-12-01

Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第1部分:“不合格”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01

Inspection of measuring and test equipment - Test instruction for zylindrical screw setting play gauges and screw check plugs
测量和试验设备的检验.zylindrical螺钉固定间隙规和螺钉检查塞的试验说明

2006-04-01