首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEEE/ANSI C50.10-1977
到馆提醒
收藏跟踪
购买正版
American National Standard General Requirements for Synchronous Machines 美国国家标准同步电机的一般要求
发布日期: 1977-06-17
-我退出了。 带励磁绕组的同步电机的要求包含在以下三个美国国家标准中:美国国家标准同步电机通用要求C50。10-1977. 美国国家标准对圆柱转子同步发电机的要求,C50。13-1977. 美国国家标准《燃气轮机驱动同步发电机的要求》,C50。14-1977. 本标准包含适用于所有类型60 Hz同步电机(分数马力电机除外)的一般要求和定义。圆柱转子同步发电机和燃气轮机驱动同步发电机的具体要求见美国国家标准C50。 13-1977和C50。14-1977.
- Inactive-Withdrawn. The requirements for synchronous machines with excitation windings are covered by three American National Standards as follows: American National Standard General Requirements for Synchronous Machines, C50.10-1977. American National Standard Requirements for Cylindrical Rotor Synchronous Generators, C50.13-1977. American National Standard Requirements for Combustion Gas Turbine Driven Synchronous Generators, C50.14-1977. This standard contains general requirements and definitions applicable to all types of 60 Hz synchronous machines except fractional horsepower motors. Specific requirements for cylindrical rotor synchronous generators and combustion gas turbine driven synchronous generators will be found in American National Standards C50.13-1977 and C50.14-1977.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
IEEE/ANSI C50.14-1977
American National Standard Requirements for Combustion Gas Turbine Driven Cylindrical Rotor Synchronous Generators
美国国家标准燃气轮机驱动圆柱转子同步发电机的要求
1977-06-10
现行
ASA S2.80-2019/Part 1/ISO 20816-1-2016
AMERICAN NATIONAL STANDARD Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (a nationally adopted international standard)
美国国家标准机械振动.机器振动的测量和评估.第1部分:一般指南(国家采用的国际标准)
现行
ANSI C82.77-1-2020
American National Standard for Lighting Equipment - Electromagnetic Compatibility (EMC) General Requirements and Criteria
美国照明设备国家标准.电磁兼容性(EMC)一般要求和标准
2020-05-01
现行
ANSI C78.62717-2018(R2023)
American National Standard for Electric Lamps - LED Modules for General Lighting - Performance Requirements
美国国家电灯标准.一般照明用LED模组.性能要求
2018-07-25
现行
ASA S12.64-2009/Part 1(R2020)
American National Standard Quantities and Procedures for Description and Measurement of Underwater Sound from Ships - Part 1: General Requirements
美国国家标准船舶水下声音描述和测量的数量和程序第1部分:一般要求
2009-09-30
现行
ASA S2.80-2019/Part 2/ISO 20816-2-2017
AMERICAN NATIONAL STANDARD Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
美国国家标准机械振动.机器振动的测量和评估.第2部分:额定转速为1500 r/min 1800 r/min 3000 r/min和3600 r/min 液膜轴承超过40 MW的陆上燃气轮机 蒸汽轮机和发电机