BS IEC 62895:2017规定了高压直流输电的试验方法和要求 电力电缆系统，采用挤压绝缘电缆及其附件，用于 额定电压不超过320 kV的固定式陆地装置。在本标准范围内，“挤压绝缘”指由制造商制造的绝缘 热塑性塑料（如聚乙烯）或交联塑料（如交联塑料）的挤出 聚乙烯、乙丙橡胶等）材料。绝缘材料可以是 未填充或填充（例如，用矿物或碳）。这些要求适用于单芯电缆及其附件，包括室外电缆 以及气体绝缘系统、接头和非对称接头在通常条件下的终端 安装和操作，但不适用于特殊电缆及其附件，如 可能需要或特殊修改标准试验的海底电缆 可能需要设计测试条件。交叉引用:IEC 60502-4:2010IEC 60811-203:2012IEC 60811-2:2004IEC 60811-409:2012IEC 60811-509:2012IEC 60811-202:2012IEC 60287-1-1:2006 Ed 2IEC 60502-2:2014IEC 60229:2007IEC 60811-606:2012IEC 62067:2011IEC 60811-412:2012IEC 60811-501:2012IEC 60811-403:2012IEC 60811-401:2012IEC 60230: 1966IEC 60811-201:2012IEC 60811-507:2012IEC 60060-2:2010IEC 60228:2004IEC 60811-508:2012IEC 60811-506:2012IEC 60287-1-1:2006/AMD1:2014IEC 60811-505:2012IEC 60811-605:2012IEC 60183:2015IEC 60885-3:2015IEC TR 61901:2016IEC 60840:2011IEC 60633:1998IEC 60853-2:1989购买本文件时可提供的所有现行修改件均包含在购买本文件中。

BS IEC 62895:2017 specifies test methods and requirements for HVDC transmission power cable systems, employing cables with extruded insulation and their accessories, for fixed land installations, for rated voltages up to and including 320 kV.Within the scope of this standard "extruded insulation" means insulation manufactured by extrusion of either thermoplastic (e.g. polyethylene) or crosslinked (e.g. crosslinked polyethylene, ethylene propylene rubber, etc.) material. The insulation material may be either unfilled or filled (e.g. with mineral or carbon).The requirements apply to single-core cables in combination with their accessories, outdoor and terminations for gas insulated systems, joints, and asymmetric joints for usual conditions of installation and operation, but not to special cables and their accessories, such as submarine cables, for which modifications to the standard tests may be necessary or special test conditions may need to be devised.Cross References:IEC 60502-4:2010IEC 60811-203:2012IEC 60332-1-2:2004IEC 60811-409:2012IEC 60811-509:2012IEC 60811-202:2012IEC 60287-1-1:2006 Ed 2IEC 60502-2:2014IEC 60229:2007IEC 60811-606:2012IEC 62067:2011IEC 60811-412:2012IEC 60811-501:2012IEC 60811-403:2012IEC 60811-401:2012IEC 60230:1966IEC 60811-201:2012IEC 60811-507:2012IEC 60060-2:2010IEC 60228:2004IEC 60811-508:2012IEC 60811-506:2012IEC 60287-1-1:2006/AMD1:2014IEC 60811-505:2012IEC 60811-605:2012IEC 60183:2015IEC 60885-3:2015IEC TR 61901:2016IEC 60840:2011IEC 60633:1998IEC 60853-2:1989All current amendments available at time of purchase are included with the purchase of this document.