首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN 485-1:2016
到馆阅读
收藏跟踪
购买正版
Aluminium and aluminium alloys. Sheet, strip and plate-Technical conditions for inspection and delivery 铝和铝合金 薄板、带材和板材
发布日期: 2016-08-31
BS EN 485-1:2016规定了锻铝和铝制品检验和交付的技术条件 一般用途的锻造铝合金薄板、带材和板材。它还包括以下条款: 订购和测试。它适用于厚度超过0.20毫米至400毫米(含400毫米)的产品。对于铝带材、薄板和板材的许多特殊应用,存在特定的欧洲标准,其中 制定了不同或额外的要求,并选择了适当的合金和回火:参见 附录A:大多数特殊欧洲标准均参考了本文件的规定。相关特殊欧洲标准的选择由买方负责。 当应用涉及特殊性能时,例如耐腐蚀性、韧性、疲劳性 强度、表面外观和焊接性能,用户应咨询供应商并考虑 相关特殊欧洲标准(如适用)。交叉引用:EN 485-2EN 485-3EN 485-4EN 515EN 541EN 573-3EN 602EN 603EN 683-1EN 851EN 941EN 1386EN 1396EN 1669EN 2004-1EN 10204EN 12258-1EN 12392EN 12482-1EN 12482-1EN 12482-2EN 13195EN 13981-2EN 14121EN 14242EN 14286EN 14287EN 14392-1EN 15088EN ISO 6892-1EN ISO 7438ISO 20482ISO 20482ISO 9591ASTM G473-ISO 6765066507-1ISO 6507-1购买本文件时可获得的所有现行修订均包含在购买本文件中。
BS EN 485-1:2016 specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications. It also includes provisions for ordering and testing.It applies to products with a thickness over 0,20 mm up to and including 400 mm.For many special applications of aluminium strip, sheet and plate, specific European Standards exist, where different or additional requirements are formulated and the appropriate alloys and tempers are selected: see Annex A. Most of these special European Standards refer to provisions of this document.The selection of the relevant special European Standards is under the responsibility of the purchaser.Whenever the application involves special properties, such as corrosion resistance, toughness, fatigue strength, surface appearance and welding properties, the user should consult the supplier and consider the relevant special European Standard, as applicable.Cross References:EN 485-2EN 485-3EN 485-4EN 515EN 541EN 573-3EN 602EN 603EN 683-1EN 851EN 941EN 1386EN 1396EN 1669EN 2004-1EN 10204EN 12258-1EN 12392EN 12482-1EN 12482-2EN 13195EN 13981-2EN 14121EN 14242EN 14286EN 14287EN 14361EN 14392EN 15088EN ISO 6892-1ISO 6892-1EN ISO 7438ISO 7438EN ISO 20482ISO 20482ISO 9591ASTM G34ASTM G47ASTM G66ASTM G67EN 573-5EN 14726EN ISO 6506-1ISO 6506-1EN ISO 6507-1ISO 6507-1All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
KS D 6701(2023 Confirm)
알루미늄 및 알루미늄 합금의 판 및 띠
铝及铝合金板材、带材和卷材
2018-05-23
现行
KS D 6701
알루미늄 및 알루미늄 합금의 판 및 띠
铝及铝合金材和板材 带材和卷曲SHEETS
2018-05-23
现行
KS D 6701
알루미늄 및 알루미늄 합금의 판 및 띠
铝和铝合金板材、带材和卷材
2018-05-23
现行
BS EN 485-2-2016+A1-2018
Aluminium and aluminium alloys. Sheet, strip and plate-Mechanical properties
铝和铝合金 薄板、带材和板材
2018-10-25
现行
BS EN 14121-2009
Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications
铝和铝合金 电工用薄板、带材和板材
2009-06-30
现行
UNE-EN 14121-2009
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications
铝和铝合金.电工用薄板、带材和板材
2009-11-25
现行
BS ISO 6361-4-2014
Wrought aluminium and aluminium alloys. Sheets, strips and plates-Sheets and plates: Tolerances on shape and dimensions
锻造铝和铝合金 床单、条子和盘子 薄板和板材:形状和尺寸公差
2014-09-30
现行
UNE-EN 485-1-2009+A1-2010
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
铝和铝合金薄板、带材和板材第1部分:检验和交货技术条件
2010-10-20
现行
BS ISO 6361-2-2014
Wrought aluminium and aluminium alloys. Sheets, strips and plates-Mechanical properties
锻造铝和铝合金 床单、条子和盘子 机械性能
2014-09-30
现行
BS ISO 6361-3-2014
Wrought aluminium and aluminium alloys. Sheets, strips and plates-Strips: Tolerances on shape and dimensions
锻造铝和铝合金 床单、条子和盘子 带材:形状和尺寸公差
2014-09-30
现行
BS EN 4400-2-2019
Aerospace series. Aluminium and aluminium- and magnesium- alloys. Technical specification-Aluminium and aluminium alloy sheet and strip
航空航天系列 铝和铝及镁合金 技术规格 铝及铝合金薄板和带材
2019-04-12
现行
ISO 6361-1-2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
锻造铝和铝合金——板材、带材和板材第1部分:检验和交付技术条件
2011-08-12
现行
UNE-EN 485-2-2009
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
铝和铝合金薄板、带材和板材第2部分:机械性能
2009-05-13
现行
ISO 6361-4-2014
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
锻铝和铝合金 - 板材 带材和板材 - 第4部分:板材和板材:形状和尺寸的公差
2014-09-08
现行
GB/T 3880.1-2023
一般工业用铝及铝合金板、带材 第1部分:一般要求
Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1 :Technical conditions of delivery
2023-09-07
现行
ISO 6361-3-2014
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
锻铝和铝合金薄板 带材和板材第3部分:带材:形状和尺寸的公差
2014-09-08
现行
ISO 6361-5-2011
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
锻造铝和铝合金——片材、带材和板材第5部分:化学成分
2011-08-12
现行
ISO 6361-2-2014
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
锻铝和铝合金 - 板材 带材和板材 - 第2部分:机械性能
2014-09-08
现行
ASD-STAN prEN 4400-2
Aluminium and aluminium alloy wrought products - Technical Specification - Part 2: Sheet and strip
铝和铝合金锻造产品.技术规范.第2部分:薄板和带材
2000-06-30
现行
BS EN 485-3-2003
Aluminium and aluminium alloys. Sheet, strip and plate-Tolerances on dimensions and form for hot-rolled products
铝和铝合金 薄板、带材和板材 热轧产品的尺寸和形状公差
2003-03-26