Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components
印刷电路板和印刷电路板组件 - 设计和使用 - 第5-2部分:附件（陆地/联合）注意事项 - 分立元件

2003-06-24

Печатные платы и печатные узлы. Проектирование и применение. Часть 5-2. Общие требования. Анализ соединений (посадочные места для монтажа компонентов). Дискретные компоненты
印刷板和印刷电路板组件 设计和使用 第5-2部分 附件（土地/联合）考虑 离散组件

2013-11-14

Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components (IEC 61188-5-2:2003); German version EN 61188-5-2:2003
印制板和印制板组件.设计和使用.第5-2部分:附件（焊盘/接头）注意事项.分立元件（IEC 61188-5-2-2003）；德文版EN 61188-5-2:2003

2004-05-01

IEC 1188-5-4. Design and use of printed boards and printed board assemblies. Part 5: Sectional design and use requirements - attachment (land/joint) considerations. Section 4: Components with J leads on two sides. 52/575/CD. Components with J leads on two sides
IEC 1188-5-4 印制板和印制板组件的设计和使用 第5部分:截面设计和使用要求——附件（接地/接头）注意事项 第4节:两侧带有J导线的部件 52/575/CD 两侧带有J导线的部件

1995-07-12

IEC 1188-5-3. Design and use of printed boards and printed board assemblies. Part 5. Sectional design and use requirements. Attachment (land/joint) considerations. Section 3. Components with gull-wing leads on two sides 52/574/CD. Components with Gull-wing leads on two sides
IEC 1188-5-3 印制板和印制板组件的设计和使用 第五部分 分段设计和使用要求 附件（土地/联合）注意事项 第三节 两侧带有鸥翼引线的部件52/574/CD 两侧带有鸥翼引线的部件

1995-07-12

IEC 1188-5-7. Design and use of printed boards and printed board assemblies. Part 5.Sectional design and use requirements. Attachment (land/joint) considerations. Section 7. Components with post (DIP) mounting leads on two sides. 52/578/CD. Components with post (DIP) mounting leads on two sides
IEC 1188-5-7 印制板和印制板组件的设计和使用 第五部分 分段设计和使用要求 附件（土地/联合）注意事项 第七节 两侧带有立柱（DIP）安装引线的组件 52/578/CD 两侧带有立柱（DIP）安装引线的部件

1995-07-12

Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements (IEC 61188-5-1:2002); German version EN 61188-5-1:2002
印制板和印制板组件.设计和使用.第5-1部分:附件（焊盘/接头）注意事项.一般要求（IEC 61188-5-1-2002）；德文版EN 61188-5-1:2002

2003-06-01

Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements; controlled impedance (IEC 61188-1-2:1998); German version EN 61188-1-2:1998
印制板和印制板组件.设计和使用.第1-2部分:一般要求；受控阻抗（IEC 61188-1-2-1998）；德文版EN 61188-1-2:1998

1999-03-01

Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides (IEC 61188-5-5:2007); German version EN 61188-5-5:2007
印制板和印制板组件.设计和使用.第5-5部分:附件（焊盘/接头）注意事项.四边带鸥翼引线的部件（IEC 61188-5-5-2007）；德文版EN 61188-5-5:2007

2008-07-01

Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides (IEC 61188-5-4:2007); German version EN 61188-5-4:2007
印制板和印制板组件.设计和使用.第5-4部分:附件（焊盘/接头）注意事项.两侧带J引线的部件（IEC 61188-5-4-2007）；德文版EN 61188-5-4:2007

2008-07-01

Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides (IEC 61188-5-3:2007); German version EN 61188-5-3:2007
印制板和印制板组件.设计和使用.第5-3部分:附件（焊盘/接头）注意事项.两侧带鸥翼引线的部件（IEC 61188-5-3-2007）；德文版EN 61188-5-3:2007

2008-07-01

Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003
印制板和印制板组件.设计和使用.第5-6部分:附件（焊盘/接头）注意事项；四边带有J形引线的芯片载体（IEC 61188-5-6-2003）；德文版EN 61188-5-6:2003

2003-10-01

Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) (IEC 61188-5-8:2007); German version EN 61188-5-8:2008
印制板和印制板组件.设计和使用.第5-8部分:附件（焊盘/接头）注意事项.面阵元件（BGA FBGA CGA LGA）（IEC 61188-5-8-2007）；德文版EN 61188-5-8:2008

2008-07-01

Draft Document - Printed board and printed board assemblies - Design and use - Part 5-5: Sectional requirements - Attachment (land/joint) considerations - Components with gull-wing leads on four sides (IEC 91/465/CDV:2004); German version prEN 61188-5-5:2004
文件草案.印制板和印制板组件.设计和使用.第5-5部分:截面要求.附件（焊盘/接头）考虑.四边带鸥翼引线的部件（IEC 91/465/CDV:2004）；德文版prEN 61188-5-5:2004

2004-10-01

Draft Document - Printed board and printed board assemblies - Design and use - Part 5-8 : Sectional Requirement - Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) (IEC 91/416/CD:2003)
文件草稿印制板和印制板组件设计和使用第5-8部分:分要求附件（焊盘/接头）注意事项面阵元件（BGA、FBGA、CGA、LGA）（IEC 91/416/CD:2003）

2004-01-01

Draft Document - Printed boards and printed board assemblies - Design and use - Part 5-4: Sectional requirements - Attachment (land/joint) consideration - Components with J leads on two sides (IEC 91/464/CDV:2004); German version prEN 61188-5-4:2004
文件草案.印制板和印制板组件.设计和使用.第5-4部分:分段要求.附件（焊盘/接头）考虑.两侧带J引线的部件（IEC 91/464/CDV:2004）；德文版prEN 61188-5-4:2004

2004-10-01

Draft Document - Printed boards and printed board assemblies - design and use - Part 5-3: Sectional requirements - attachment (land/joint) considerations - components with gull-wing leads on two sides (IEC 91/463/CDV:2004); German version prEN 61188-5-3:2004
文件草案.印制板和印制板组件.设计和使用.第5-3部分:截面要求.附件（焊盘/接头）考虑.两侧带鸥翼引线的部件（IEC 91/463/CDV:2004）；德文版prEN 61188-5-3:2004

2004-10-01