IEC 60071-1:20 19作为IEC 60071-1:20 19 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60071-1:20 19适用于最高电压高于1 kV的设备的三相交流系统。它规定了设备和这些系统安装的相间、相间和纵向绝缘额定耐压的选择程序。它还给出了标准耐压列表，从中选择额定耐压。本文件描述了所选耐压与设备的最高电压相关联。该协会仅用于绝缘协调目的。本文件未涵盖人体安全要求。虽然本文件的原则也适用于输电线路绝缘，但其耐压值可以不同于标准额定耐压。设备委员会负责指定适用于相关设备的额定耐压和测试程序，并考虑本文件的建议。 IEC 60071-2中的注释，绝缘co的所有规则？详细说明了本文件中给出的排序依据，特别是标准额定耐压与设备最高电压的关联。当一组以上的标准额定耐受电压与设备的相同最高电压相关时，为选择最合适的一组提供指导。 较上一版主要变化如下:-所有参考文献更新为现行IEC标准，并删除参考书目； -澄清了一些定义，以避免重叠并确保明确理解； -字母符号进行更改和更正，以保持与IEC相关标准的一致性； -更改了一些标题以澄清理解（见第A.2、A.3条和附件B）。

IEC 60071-1:2019 is available as IEC 60071-1:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60071-1:2019 applies to three-phase AC systems having a highest voltage for equipment above 1 kV. It specifies the procedure for the selection of the rated withstand voltages for the phase-to-earth, phase-to-phase and longitudinal insulation of the equipment and the installations of these systems. It also gives the lists of the standard withstand voltages from which the rated withstand voltages are selected. This document describes that the selected withstand voltages are associated with the highest voltage for equipment. This association is for insulation co-ordination purposes only. The requirements for human safety are not covered by this document. Although the principles of this document also apply to transmission line insulation, the values of their withstand voltages can be different from the standard rated withstand voltages. The apparatus committees are responsible for specifying the rated withstand voltages and the test procedures suitable for the relevant equipment taking into consideration the recommendations of this document.
NOTE In IEC 60071-2, all rules for insulation co？ordination given in this document are justified in detail, in particular the association of the standard rated withstand voltages with the highest voltage for equipment. When more than one set of standard rated withstand voltages is associated with the same highest voltage for equipment, guidance is provided for the selection of the most suitable set.
The main changes from the previous edition are as follows:
- all references are updated to current IEC standards, and the bibliography is deleted;
- some definitions are clarified in order to avoid overlapping and ensure clear understanding;
- letter symbols are changed and corrected in order to keep the consistency with relevant IEC standards;
- some titles are changed to clarify understanding (see Clauses A.2, A.3 and Annex B).