1.1 本规程包括确定粘合剂是否对铜有腐蚀作用。通常用于区分可能导致电气和电子设备腐蚀的材料。该程序是一项主观测试，其精度和准确性尚未确定。不建议在背衬上使用粘合剂。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 5.1 在许多电气和电子应用中，粘合剂可以暴露于电势和湿度。因此，希望提供一种检查某些粘合剂对金属的腐蚀倾向的方法。 5.2 尽管电解腐蚀是粘合剂中离子传导的直接结果，但暴露金属的性质将影响金属腐蚀的严重程度和腐蚀产物的可见性。 由于铜能直观地显示腐蚀情况，而且铜在电路中的广泛应用，因此在本实践中使用铜。然而，这并不排除为特定目的使用其他金属。 5.3 该程序是一项主观测试，因为确定是否存在腐蚀是基于目视检查绿色变色或其他腐蚀迹象。

1.1 This practice covers the determination of whether an adhesive has any corrosive effect on copper. It is ordinarily intended to distinguish materials that might cause corrosion in electrical and electronic equipment. This procedure is a subjective test for which precision and accuracy have not been established. It is not recommended for adhesives on backing. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Adhesives can be exposed to both electrical potential and humidity in many electrical and electronic applications. It is therefore desirable to provide a means of examining the corrosive tendencies of certain adhesives towards metals. 5.2 Although electrolytic corrosion is a direct result of ionic conduction in the adhesive, the nature of the exposed metals will have a bearing on both the severity of metal attack and the visibility of corrosion products. Because it gives a visual indication of corrosion and because of its widespread use in electrical circuits, copper is used in this practice. However, this would not preclude the use of other metals for specific interests. 5.3 This procedure is a subjective test in that determinations of the presence of corrosion is based on a visual inspection for a green discoloration or other evidence of corrosion.