Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18 Gauge碳钢（M-1、P-1或S-1至M-1、P-1或S-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

2002-01-01

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS WELDED CONDITIONS WITH BACKING
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在带衬垫的焊态条件下的保护金属极电弧焊标准焊接工艺规范（WPS）

1989-12-18

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS WELDED CONDITIONS WITH BACKING
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在带衬垫的焊态条件下的保护金属极电弧焊标准焊接工艺规范（WPS）

1989-12-18

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚的E7018焊态或焊后热处理条件下碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 主要用于管道应用

2019-03-01

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚的E7018焊态或焊后热处理条件下碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 主要用于管道应用

2019-03-01

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
碳钢（M-1/P-1/S-1 第1组或第2组）与奥氏体不锈钢（M-8/P-8/S-8 第1组） 1/8至1-1/2英寸的气体保护金属极电弧焊后的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28

Standard WPS for Gas Tungsten Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊接或焊后热处理条件下进行钨极气体保护焊的标准WPS 主要用于管道应用

2019-03-01

Standard WPS for Gas Tungsten Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊接或焊后热处理条件下进行钨极气体保护焊的标准WPS 主要用于管道应用

2019-03-01

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe App.
1/8至1/2“厚、INMs-1、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊态或焊后热处理状态下用自耗嵌件进行钨极气体保护焊的标准WPS 主要用于管道应用

2001-10-31

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直下坡）和E7018（垂直上坡）碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 焊接状态 主要用于管道应用

2019-03-01

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直下坡）和E7018（垂直上坡）碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 焊接状态 主要用于管道应用

2019-03-01

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直下坡根部 平衡垂直上坡）碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 焊接状态 主要用于管道应用

2019-03-01

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, E6010 (Vertical Uphill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚E6010（垂直向上）碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 然后是E7018（垂直向上） 焊态或焊后热处理状态 主要用于管道应用

2019-03-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the as-Welded Condition, With Backing
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下带衬垫的保护金属极电弧焊的标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS） 厚 ER3XX-XX 焊接状态 主要用于管道应用

1997-03-20

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8/P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下 带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（Swps）

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8)10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的碳钢与奥氏体不锈钢（M-1至M-8或P-8）10至18 Gauge的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

STANDARD WELDING PROCEDURE SPECIFICATION(WPS) FOR; GAS TUNGSTEN ARC WELDISTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED
标准焊接工艺规范（WPS）；钨极气体保护焊1/16至1-1/2英寸厚ER309（L）焊态奥氏体不锈钢（M-8/P-8/S-8 1组）与碳钢（M-1/P-1/S-1 1或2组）的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的10至18号规格碳钢（M-1 第1组）的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直上坡）焊态碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范 主要用于管道应用

2019-03-01