1.1 本规程涵盖了在HFC-23的处理、运输和储存方面对供应商、购买者和用户的指导和指导。 1.2 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规程规定了通过商业和军事渠道分销时遇到的HFC-23的搬运、运输和储存要求。其目的是确保HFC-23的处理、运输和存储方式不会降低其物理特性值。 运输可以通过各种方式进行，例如但不限于公路、铁路、水和航空。

1.1 This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-23. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This practice provides requirements for the handling, transportation, and storage of HFC-23 encountered in distribution through both commercial and military channels. It is intended to ensure that HFC-23 is handled, transported, and stored in such a way its physical property values are not degraded. Transport may be by various means, such as, but not limited to, highway, rail, water, and air.