Compression and mechanical connectors for power cables with copper or aluminium conductors, Part 1: Test methods and requirements
铜或铝导体电力电缆用压缩和机械连接器第1部分:试验方法和要求

1995-10-05

Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors
铜或铝导体电力电缆用非绝缘压缩和机械连接器的安装和检查实施规程

2008-12-31

Specification for performance of mechanical and compression joints in electric cable and wire connectors-Compression joints in nickel, iron and plated copper conductors
电缆和电线连接器中机械接头和压缩接头的性能规范 镍、铁和镀铜导线中的压缩接头

1973-10-17

전력 케이블용 압축 및 기계적 커넥터 — 제1-1부: 비절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 이하 전력 케이블용 압축 및 기계적 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（Um=1.2kV）以下电力电缆用挤压和机械连接器的试验方法和要求

2023-05-16

Compression and mechanical connectors for power cables-Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
电力电缆的压缩和机械连接器 在非绝缘导体上测试额定电压不超过1kV（U_m=1.2kV）的电力电缆用压缩连接器和机械连接器的试验方法和要求

2019-09-30

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（U_m=1.2kV）以下电力电缆用压缩和机械连接器的试验方法和要求

2018-05-08

额定电压35kV（Um=40.5kV）及以下电力电缆导体用压接式和机械式连接金具 试验方法和要求
Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements

2008-12-31

전력 케이블용 압축 및 기계적 커넥터 — 제1-3부: 비절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 초과 30 kV(Um = 36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压1kV（Um=1.2kV）以上至30kV（Um=36kV）电力电缆用挤压和机械连接器的试验方法和要求

2023-05-16

电力电缆导体用压接型铜、铝接线端子和连接管
Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors

2008-12-30

Compression and mechanical connectors for power cables-Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 36 kV (U_m = 42 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器

2019-10-08

전력 케이블용 압축 및 기계적 커넥터 — 제1-2부: 절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 이하 전력 케이블용 절연 관통 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（Um=1.2kV）以下电力电缆用绝缘穿孔连接器的试验方法和要求

2023-05-16

정격 전압 30 kV(Um＝36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터－제1부：시험 방법 및 요구 사항
额定电压30kV（Um＝36kV）以下电力电缆用压缩连接器和机械连接器第1部分:试验方法和要求

2006-11-24

정격 전압 30 kV(Um = 36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터 —제1부: 시험방법 및 요구사항
额定电压30kV（Um=36kV）以下电力电缆用压缩和机械连接器第1部分:试验方法和要求

2021-10-21

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压大于1kV（U_m=1,2kV）至30kV（U_m=36kV）的电力电缆用压缩和机械连接器的试验方法和要求

2018-05-08

Compression and mechanical connectors for power cables-Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
电力电缆的压缩和机械连接器 在绝缘导线上测试额定电压不超过1kV（U_m=1.2kV）的电力电缆用绝缘穿孔连接器的试验方法和要求

2019-09-30

Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
电力电缆用压缩连接器和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（U_m=1.2kV）以下电力电缆用绝缘穿孔连接器的试验方法和要求

2018-05-08

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U<(Index)m> = 1.2 kV) up to 36 kV (U<(Index)m> = 42 kV) tested on non-insulated conductors (IEC 61238-1-3:2018)
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压大于1kV（U<（指数）m>=1.2kV）至36kV（U<（指数）m>=42kV）的电力电缆用压缩和机械连接器的试验方法和要求（IEC 61238-1-3-2018）

2020-11-01

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U<(Index)m> = 1.2 kV) tested on non-insulated conductors (IEC 61238-1-1:2018); German version EN IEC 61238-1-1:20
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（U<（指数）m>=1.2kV）以下电力电缆用压缩和机械连接器的试验方法和要求（IEC 61238-1-1-2018）；德国版本EN IEC 61238-1-1:20

2020-11-01

Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) -- Part 1: Test methods and requirements. (IEC 61238-1:2003, modified)
额定电压36kV（Um=42kV）以下电力电缆用压缩连接器和机械连接器第1部分:试验方法和要求 （IEC 61238-1-2003 修改）

2006-06-07

Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm²
6 mm以下铜导线电缆用预绝缘压缩端子和连接器的安装和检查实施规程

2006-09-29