1.1 这些实践描述了包装/包装铝和镁产品的方法，为国外和国内的储存或装运做准备。假设在运输过程中进行适当和正常的处理，这些做法旨在将产品完好无损地运送到目的地。关于国防部的再分配，请参阅补充要求。 1.2 以英寸磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.3 铝和镁产品必须进行保存和包装，以便在运输和储存过程中得到充分保护，免受可能的损坏。主要损坏类型有: 1.3.1 机械，包括搬运和储存过程中的弯曲、挤压、凹陷、刮擦或刨削；以及由于材料运输过程中的振动而产生的磨损。 1.3.2 腐蚀或水渍，由包装材料暴露于水引起，无论是外部施加的，还是由潮湿大气中的温度变化引起的冷凝物。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 These practices describe methods of packaging/packing aluminum and magnesium products, in preparation for storage or shipment, both foreign and domestic. Assuming proper and normal handling in transit, these practices are designed to deliver the products to their destination in good condition. For DOD redistribution, see Supplementary Requirements. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 Aluminum and magnesium products must be preserved and packed so as to be adequately protected from possible damage during shipment and storage. Major damage types are: 1.3.1 Mechanical, including bending, crushing, denting, scratching, or gouging during handling and storage; and abrasions resulting from vibration during transport of the material. 1.3.2 Corrosion, or water stain, resulting from exposure of packed material to water, either externally applied, or as condensate caused by temperature variations in a humid atmosphere. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.