机械式粉末成型压力机 技术条件
Mechanical powder molding press-Specifications

2020-04-16

电磁压力机 第2部分：技术条件
Electromagnetic mechanical presses-Part 2: Specifications

2018-07-04

机械压力机用安全双联电磁阀 技术要求
Safety double solenoid valve for mechanical presses - Specification

2014-05-06

台式压力机 第1部分：技术条件
Bench mechanical power presses-Part 1:Specifications

2011-05-18

机械式干粉压力机 通用技术条件
General specifications for mechanical dry powder compacting presses

2007-08-28

Часы настольные и настенные балансовые механические. Общие технические условия
表和墙机械时钟与平衡振荡器 一般规格

机械振动 恒态（刚性）转子平衡品质要求 第1部分：规范与平衡允差的检验
Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances

2006-09-08

Specification for capacity ratings and dimensions of power presses, mechanical open front type
机械前开式动力压力机的额定容量和尺寸规范

1985-04-30

模锻锤和大型机械锻压机用模块技术条件
Specification of large die-blocks used for die-forging hammer and mechanical forging press

2008-06-06

Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (ISO 1940-1:2003)
机械振动恒定（刚性）状态下转子的平衡质量要求第1部分:平衡公差的规范和验证

2004-04-01

Accuracy of machine tools and methods of test-Specification for power presses, mechanical open front type
机床精度和试验方法

1985-04-30

Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force
额定力250 kN至4000 kN的机械直边高速压力机规范

1993-10-15

Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force
标称力为400 kN至4000 kN（含）的机械直边单动压力机规范

1993-10-15

Connectors for electrical and electronic equipment - Part 4: Detail specification for shielded or unshielded, free and fixed connectors with up to 8 ways for balanced single-pair data transmission with current carrying capacity - Mechanical mating information, pin assignment and additional requirements for Type 4
电气和电子设备连接器.第4部分:带载流能力的平衡单对数据传输用8路以下屏蔽或非屏蔽、自由和固定连接器的详细规范.4型的机械配合信息、引脚分配和附加要求

2022-09-15

Connectors for electrical and electronic equipment - Part 7: Detail specification for up to 7 ways including PE or FE (data/power) and shield pin, free and fixed circular connectors for balanced single-pair data transmission with current-carrying capacity - Mechanical mating information, pin assignment and additional requirements for type 7
电气和电子设备用连接器.第7部分:带载流能力的平衡单对数据传输用包括PE或FE（数据/电源）和屏蔽销在内的7路自由和固定圆形连接器的详细规范.机械配合信息、销分配和7型的附加要求

2023-05-23