现行

BS 4584-103.1-1990

Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits-Specification for prepreg for use as a bonding sheet material in the fabrication of multilayer printed board
印制线路板用金属覆层基材 与印刷电路有关的特殊材料 多层印制板制造中用作粘合片材料的预浸料规范

1990-02-28

现行

BS 4584-103.3-1992

Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits-Specification for permanent polymer coating materials (solder resist) for use in the fabrication of printed boards
印制线路板用金属覆层基材 与印刷电路有关的特殊材料 印制板制造用永久性聚合物涂层材料（阻焊剂）规范

1992-03-31

现行

BS EN 60249-2-3-1994

Specifications-Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
规格

2001-04-15

现行

UNE 20620-3-1-1981

METAL-CLAS BASE MATERIALS FOR PRINTED CIRCUITS. SPECIAL MATERIALS. SPECIFICATION NO.1: PRE-PREG FOR MULTILAYER PRINTED BOARDS
印刷电路板用金属覆层基材 特殊材料 规范1:多层印制板的预浸

1981-12-15

现行

UNE 20620-4-1980

METAL-CLAD BASE MATERIALS FOR PRINTED CIRCUITS. COPPER FOIL
印制电路用金属包覆基材 铜箔

1980-12-15

现行

BS 4584-15-1978

Metal-clad base materials for printed wiring boards-Adhesive coated polymeric films: PETP-F-15 and PI-F-15
印制线路板用金属覆层基材 涂胶聚合物薄膜:PETP-F-15和PI-F-15

1978-10-31

现行

MIL MIL-S-13949/31

SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL BI (NONWOVEN ARAMID REINFORCEMENT, POLYIMIDE RESIN, METAL CLAD OR UNCLAD) (NO S/S DOCUMENT)
基材BI（非织造芳纶增强、聚酰亚胺树脂、金属包覆或非包覆）层压印刷线路板薄板（无S/S文件）

1994-03-17

现行

MIL MIL-S-13949/31 Notice 1-Inactivation

SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL BI (NONWOVEN ARAMID REINFORCEMENT, POLYIMIDE RESIN, METAL CLAD OR UNCLAD) (NO S/S DOCUMENT)
片材 印刷线路板 层压 基材BI（非织造芳纶增强材料 聚酰亚胺树脂 金属包覆或未包覆）（无S/S文件）

1997-08-01

现行

BS EN 61249-3-5-1999

Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards)-Transfer adhesive films for flexible printed boards
互连结构材料 覆层和非覆层非增强基材分规范集（适用于柔性印制板）

1999-06-15

现行

MIL MIL-P-13949/8D

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GT, GLASS BASE, WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/8C) (NO S/S DOCUMENT)
覆铜箔阻燃聚四氟乙烯树脂编织玻璃基GT基材金属覆层层压塑料板（用于印制线路板）（代替MIL-P-13949/8C）（无S/S文件）

1988-03-28

现行

MIL MIL-P-13949/8D Notice 1-Validation

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GT, GLASS BASE, WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/8C) (NO S/S DOCUMENT)
层压金属覆塑料片（用于印刷线路板） 基材GT 玻璃基 编织聚四氟乙烯树脂 阻燃 覆铜（取代MIL-P-13949/8C）（无S/S文件）

1994-07-11

现行

MIL MIL-P-13949/8D Notice 3-Cancellation

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GT, GLASS BASE, WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/8C) (NO S/S DOCUMENT)
塑料片 层压材料 金属层（印刷线路板） 基材GT 玻璃基 WOVEN 聚四氟乙烯树脂 耐火树脂 铜箔（取代MIL-P-13949/8C）（NO S/S文件）

1988-03-28

现行

BS EN 61249-2-1-2005

Materials for printed boards and other interconnecting structures-Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
印制板和其他互连结构用材料

2005-08-09

现行

IEC 61249-2-51-2023

Materials for printed boards and other interconnecting structures - Part 2-51: Reinforced base materials, clad and unclad - Base materials for integrated circuit card carrier tape, unclad
印制板和其他互连结构材料.第2-51部分:包覆和非包覆增强基材.非包覆集成电路卡载带基材

2023-05-11

现行

MIL MIL-P-13949/6D

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GP, GLASS BASE, NON WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/6C) (NO S/S DOCUMENT)
覆铜阻燃聚四氟乙烯树脂无纺布基材GP玻璃基金属覆层层压塑料板（用于印制线路板）（代替MIL-P-13949/6C）（无S/S文件）

1987-02-11

现行

MIL MIL-P-13949/6D Notice 3-Cancellation

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GP, GLASS BASE, NON WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/6C) (NO S/S DOCUMENT)
塑料片 层压材料 金属层（印刷线路板） 基材GP 玻璃基 非织造布 聚四氟乙烯树脂 耐火树脂 铜箔（取代MIL-P-13949/6C）（无S/S文件）

1987-02-11

现行

MIL MIL-P-13949/6D Notice 1-Validation

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GP, GLASS BASE, NON WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/6C) (NO S/S DOCUMENT)
层压金属覆塑料片（用于印刷线路板） 基材GP 玻璃基 无纺布 聚四氟乙烯树脂 阻燃 覆铜（取代MIL-P-13949/6C）（无S/S文件）

1994-07-11

现行

MIL MIL-P-13949/6D Notice 2-Inactivation

PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GP, GLASS BASE, NON WOVEN, POLYTETRAFLUOROETHYLENE RESIN, FLAME RESISTANT, COPPER-CLAD (SUPERSEDING MIL-P-13949/6C) (NO S/S DOCUMENT)
层压金属覆塑料片（用于印刷线路板） 基材GP 玻璃基 无纺布 聚四氟乙烯树脂 阻燃 覆铜（取代MIL-P-13949/6C）（无S/S文件）

1997-08-01

现行

IEC 61249-3-5-1999

Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films
印刷板和其他互连结构材料 - 第3-5部分:非增强基材 包层和包装（用于柔性印刷板）的分段规格 - 转印胶带

1999-02-10

现行

UNE-EN 61249-3-5-2000

MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES. PART 3-5: SECTIONAL SPECIFICATION SET FOR UNREINFORCED BASE MATERIALS, CLAD AND UNCLAD (INTENDED FOR FLEXIBLE PRINTED BOARDS). TRANSFER ADHESIVE FILMS.
印制板和其他互连结构用材料 第3-5部分:覆层和非覆层（用于柔性印制板）无加强基材分规范集 转移胶粘膜

2000-11-21