BS EN 10305-6:2016规定了 用于液压和气动动力系统的圆形截面。根据EN 10305本部分的要求，管子的特点是具有精确定义的公差 尺寸和规定的表面粗糙度。允许的压力速率和最高温度由客户负责 根据最新技术，并应用本规范中规定的安全系数 适用的法规、规范或标准。关于低温范围的适用性 冲击能量要求在0°C下给出。注:一旦本标准在《欧盟官方公报》（OJEU）上发布，则 指令2014/68/EU，符合指令基本安全要求（ESR）的推定 2014/68/EU仅限于本标准中材料的技术数据，并不假定 特定设备项目的材料。 因此，本材料中所述技术数据的评估 根据该设备的设计要求，验证ESRs的压力 满足设备指令，需要执行。交叉引用:EN 10020:2000EN 10021:2006EN 10027-1EN 10027-2EN 10052:1993EN 10168:2004EN 10204:2004EN 10266:2003EN ISO 377ISO 377:2013EN ISO 2566-1ISO 2566-1EN ISO 4287ISO 4287EN ISO 6892-1ISO 6892-1EN ISO 8492ISO 8493ISO 8493EN ISO 10893-1ISO 10893-1ISO 10893-1ISO 10893-2EN ISO 10893-1ISO 10893-3EN ISO 10893-10ISO 10893-10ISO 11484/EU9723购买本文件时提供的修订内容包括在内。

BS EN 10305-6:2016 specifies the technical delivery conditions for welded cold drawn tubes of circular cross section for use in hydraulic and pneumatic power systems.Tubes according to this part of EN 10305 are characterized by having precisely defined tolerances on dimensions and a specified surface roughness.The allowed pressure rates and upper temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. Concerning the lower temperature range applicability the impact energy requirements are given at 0 °C.NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.Cross References:EN 10020:2000EN 10021:2006EN 10027-1EN 10027-2EN 10052:1993EN 10168:2004EN 10204:2004EN 10266:2003EN ISO 377ISO 377:2013EN ISO 2566-1ISO 2566-1EN ISO 4287ISO 4287EN ISO 6892-1ISO 6892-1EN ISO 8492ISO 8492EN ISO 8493ISO 8493EN ISO 10893-1ISO 10893-1EN ISO 10893-2ISO 10893-2EN ISO 10893-3ISO 10893-3EN ISO 10893-10ISO 10893-10ISO 11484:2009EN ISO 97122014/68/EU97/23/ECAll current amendments available at time of purchase are included with the purchase of this document.