现行

NB/T 20057.2-2012

压水堆核电厂反应堆系统设计 堆芯 第2部分：热工水力设计准则
Pressurized water reactor nuclear power plants reactor system design-Core-Part 2:Thermal hydraulic design criteria

2012-01-06

现行

NB/T 20327.2-2015

压水堆核电厂特种门 第2部分：施工
Special doors of pressurized water reactor nuclear power plant Part 2:Manufacture

2015-04-02

现行

NB/T 20478.2-2018

压水堆核电厂反应堆压力容器密封环技术规范 第2部分：C型密封环
The technical specification for reactor pressure vessel sealing ring of pressurized water reactor nuclear power plants-Part 2:C-ring

2018-03-22

现行

GB/T 16702.2-2025

压水堆核电厂核岛机械设备设计规范 第2部分：1级设备
Design specification for mechanical components in nuclear island of pressurized water reactor nuclear power plants—Part 2：Class 1 components

2025-02-28

现行

GB/T 16702.3-2025

压水堆核电厂核岛机械设备设计规范 第3部分：2级设备
Design specification for mechanical components in nuclear island of pressurized water reactor nuclear power plants—Part 3: Class 2 components

2025-02-28

现行

NB/T 20354.2-2015

压水堆核电厂汽轮机转子设计制造规范 第2部分：套装转子
Design and manufactering specification of steam turbine rotor for pressurized water reactor nuclear power plant-Part 2:Shrunk rotor

2015-07-01

现行

GB/T 13632.2-2006

监督压水堆堆芯充分冷却的测量要求 第2部分：冷停堆期间监测仪表的要求
Measurements for monitoring adequate cooling within the core of pressurized light water reactors Part 2: Instrumentation requirements during cold shutdown

2006-03-02

现行

NB/T 20009.2-2010

压水堆核电厂用焊接材料 第2部分：1、2、3级设备用低合金钢焊条
Welding material for pressurized water reactor nuclear power plants-Part 2:Low alloy steel covered electrodes for Class 1,2,3,components

2010-05-24

现行

NB/T 20008.17-2012

压水堆核电厂用其他材料 第17部分：2、3级非合金及合金球墨铸铁件
Other material for pressurized water reactor nuclear power plants-Part 17:Class 2 and 3 unalloyed and alloy ductile iron castings

2012-10-19

现行

DIN 25475-2

Nuclear facilities - Operational monitoring - Part 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors
核设施.运行监测.第2部分:压水反应堆主冷却剂回路振动特性变化早期检测用振动监测

2009-05-01

现行

NB/T 20008.5-2012

压水堆核电厂用其他材料 第5部分:1、2级镍-铬-铁合金热轧板
Other material for pressurized water reactor nuclear power plants-Part 5:Class 1 and 2 hot rolled nickel-chromium-iron alloy plates

2012-01-06

现行

NB/T 20007.9-2011

压水堆核电厂用不锈钢 第9部分：1、2、3级奥氏体不锈钢对焊无缝管件
Stainless steel for pressurized water reactor nuclear power plant-Part 9:Class 1、2、3 austenitic stainless steel seamless buttwelding fittings

2011-07-01

现行

NB/T 20005.14-2012

压水堆核电厂用碳钢和低合金钢 第14部分：2、3级对焊无缝管件
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 14:Class 2 and 3 butt-welding seamless fittings

2012-10-19

现行

NB/T 20008.2-2010

压水堆核电厂用其它材料 第2部分:蒸汽发生器、反应堆冷却剂泵和主蒸汽管路支承件用锰-钼-钒合金钢俦件
Other material for pressurized water reactor nuclear power plants-Part 2:Mn-Mo-V steel castings for use in the fabrication of steam generator and reactor coolant pump supports,main steam line supports

2010-05-01

现行

NB/T 20007.18-2012

压水堆核电厂用不锈钢 第18部分：2、3级辅助泵驱动轴用马氏体不锈钢锻、轧件
Stainless steel for pressurized water reactor nuclear power plants-Part 18:Rolled or forged martensitic stainless steel parts for class 2 and 3 auxiliary pump drive shafts

2012-01-06

现行

NB/T 20005.10-2013

压水堆核电厂用碳钢和低合金钢 第10部分：用填充金属焊接的2、3级钢管
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 10:Class 2 and 3 steel pipes welded with the addition of filler metal

2013-06-08

现行

NB/T 20005.13-2012

压水堆核电厂用碳钢和低合金钢 第13部分：2、3级热交换器传热管用无缝冷拔钢管
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 13:Seamless drawn carbon steel tubes for class 2 and 3 heat exchangers

2012-01-06

现行

NB/T 20133.2-2012

压水堆核电厂设施设备防护涂层规范 第2部分：涂层系统在模拟设计基准事故条件下的评价试验方法
Specifications for protective coatings used in pressurized water reactor nuclear power plants-Part 2:Standard test method for evaluating coatings at simulated design basis acciden(DBA)conditions

2012-01-06

现行

NB/T 20005.15-2013

压水堆核电厂用碳钢和低合金钢 第15部分：用填充金属焊接的2、3级管件
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 15:Fittings welded with the addition of filler metal for use in class 2 and 3 auxiliary piping

2013-06-08