IEC 61347-2-1:20 24作为IEC 61347-2-1:20 24 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 61347-2-1:20 24规定了荧光灯和其他放电灯的启动装置（辉光启动器和点火器除外的启动器）的安全要求，这些灯和其他放电灯在50 Hz或60 Hz的交流电源上使用，产生不大于100 kV的启动脉冲，并与IEC 60081、IEC 60188、IEC 60192、IEC 60662、IEC 61167、IEC 61195、IEC 61199、IEC 61347-2-8和IEC 61347-2-8和IEC 61347-2-9中涵盖的灯和控制设备结合使用。 本第二版取消并取代了2000年出版的第一版、修正案1:20 05和修正案2:20 13。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: a)更新规范性参考文献，酌情引入注明日期的参考文献； b)澄清样品项目编号； c)条款编号与IEC 61347-1的条款编号一致； d)重新编号第15条和第16条。

IEC 61347-2-1:2024 is available as IEC 61347-2-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61347-2-1:2024 specifies safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on AC supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and controlgear covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9.
This second edition cancels and replaces the first edition published in 2000, Amendment 1:2005 and Amendment 2:2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of normative references, introducing dated references where appropriate;
b) clarification of sample item numbers;
c) alignment of clause numbers with those of IEC 61347-1;
d) renumbering of Clause 15 and Clause 16.