BS EN 13108-21:2016规定了使用的质量和工厂生产控制要求 在制造用于道路、机场和其他交通工具的沥青混合料期间 地区。在合同范围内进行的附加测试超出了本欧洲标准的范围。如果采用CPR下的水泥标记，工厂生产控制将适用于沥青混合料的欧洲标准。在CE标记的情况下，这也可能是质量控制的一部分 不适用。因此，制造商应通知工厂为生产 沥青混合料不应要求重复或额外的审核，以确定是否需要进行标记 不适用。本欧洲标准适用于成分和目标成分已知的沥青混合料的控制，并通过型式试验证明符合所有要求 适当指定的成分、性能相关或基于性能的要求 EN 13108-1至-7和EN 13108-9。交叉引用:EN 12697-27EN 12697-28EN 13043EN 13108-6EN 1426EN 1427EN 12697-3EN 12697-4EN 12697-8EN 12697-20EN 13108EN 14023EN ISO 9001ISO 9001购买本文件时提供的所有现行修订均包含在购买本文件中。

BS EN 13108-21:2016 specifies both quality and Factory Production Control requirements for use during the manufacture of bituminous mixtures intended for use on roads, airfields and other trafficked areas.Additional testing carried out within contracts is beyond the scope of this European Standard.The Factory Production Control will be applied to European Standards for bituminous mixtures if CEmarking under CPR is applied. It may also be part of quality control in situations where CE-marking does not apply. As such, manufacturers factories' notified to issue CE Marking for production of bituminous mixtures should not require duplicate or additional auditing for those situations where CEmarking does not apply.This European Standard is applicable to the control of bituminous mixture where the constituents and target composition are known, and have been shown by means of Type Testing to comply with all appropriate specified compositional, performance related or performance based requirements in EN 13108-1 to -7 and EN 13108-9.Cross References:EN 12697-27EN 12697-28EN 13043EN 13108-6EN 1426EN 1427EN 12697-3EN 12697-4EN 12697-8EN 12697-20EN 13108EN 14023EN ISO 9001ISO 9001All current amendments available at time of purchase are included with the purchase of this document.