BS ISO 2715:2017描述并讨论了涡轮流量计的特性。注意 涡轮流量计用于液体计量时应考虑的因素。其中包括 待计量液体的性质和性质，仪表的正确安装和操作， 环境影响，以及二次设备和辅助设备的广泛选择。仪表方面 还讨论了验证和维护。本文件适用于任何适当液体的计量。提供了有关使用 涡轮流量计中的两个流量计- 组成液体混合物，如水和油。当计量条件下存在气体或固体时（即。 两相流）。它可以应用于工业中遇到的各种液体 计量且不限于碳氢化合物。碳氢化合物财政/托管转移申请预期绩效指南 这是概述。本文件不适用于低温液体，如液化天然气（LNG）和冷冻水 石油气。它不包括饮用水应用。 交叉引用:ISO 4006ISO/IEC指南99ISO 91ISO指南99:1993ISO 9770ISO 5024API MPMS 13.2API MPMS 5.3，NORSOK I-106:2014ISO 4267-2ISO 8222ISO/IEC 17025API MPMS 13.1ISO 4124API MPMS 5.2ISO 6551API MPMS 4.8ISO 5168NORSOK I-105:2011ISO 9200ISO 91-2ISO 12242ISO 7278-3ISO 4185ISO 91-1API MPMS 12.2IML R117ISO 7278-2ISO 7278-1购买本文件时提供的所有当前修订版。

BS ISO 2715:2017 describes and discusses the characteristics of turbine flowmeters. Attention is given to the factors to be considered in the application of turbine meters to liquid metering. These include the properties and nature of the liquid to be metered, the correct installation and operation of the meter, environmental effects, and the wide choice of secondary and ancillary equipment. Aspects of meter proving and maintenance are also discussed.This document is applicable to the metering of any appropriate liquid. Guidance is given on the use of turbine meters in the metering of two-component liquid mixtures such as water and oil.It is not applicable to two-phase flow when gases or solids are present under metering conditions (i.e. two-phase flow). It can be applied to the many and varied liquids encountered in industry for liquid metering and is not restricted to hydrocarbons.Guidance on the performance expected for fiscal/custody transfer applications for hydrocarbons is outlined.This document is not applicable to cryogenic liquids, such as liquefied natural gas (LNG) and refrigerated petroleum gas. It does not cover potable water applications.Cross References:ISO 4006ISO/IEC Guide 99ISO 91ISO Guide 99:1993ISO 9770ISO 5024API MPMS 13.2API MPMS 5.3,NORSOK I-106:2014ISO 4267-2ISO 8222ISO/IEC 17025API MPMS 13.1ISO 4124API MPMS 5.2ISO 6551API MPMS 4.8ISO 5168NORSOK I-105:2011ISO 9200ISO 91-2ISO 12242ISO 7278-3ISO 4185ISO 91-1API MPMS 12.2OIML R117ISO 7278-2ISO 7278-1All current amendments available at time of purchase are included with the purchase of this document.