1.1本规程涵盖了可用于确定中子暴露变化（注量>1.0 MeV、dpa等）以及压力容器壁监测位置和点之间的暴露率和能谱的分析和分析实验方法。还提出了报告这些分析结果和指定不确定性的程序。本规程涉及监督计划的物理剂量学方面，必须与其他矩阵E 706标准结合使用，以提供基于冶金损伤相关性的推断。 1.2根据本规程确定的物理剂量学关系可用于通过应用规程E 693和指南E 900标准，使用通量（E>1.0 MeV）、dpa或损伤函数导出的暴露参数作为独立暴露变量来估计压力容器损伤。支持这些标准应用的是2.1中确定的E 944、E 1018、E 1005和E 854标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This practice covers analytical and analytical-experimental approaches that can be used to determine the variation in neutron exposure (fluence E > 1.0 MeV, dpa, etc.) and exposure rate and energy spectrum between surveillance locations and points in the pressure vessel wall. Procedures for reporting the results of these analyses with assigned uncertainties are also suggested. This practice deals with the physics-dosimetry aspects of surveillance programs and must be used in conjunction with other Matrix E 706 standards to provide extrapolations based on metallurgical damage correlations. 1.2 The physics-dosimetry relationships determined from this practice may be used to estimate pressure vessel damage through application of Practice E 693 and Guide E 900 standards, using fluence (E > 1.0 MeV), dpa, or damage function derived exposure parameters as independent exposure variables. Supporting the application of these standards is E 944, E 1018, E 1005, and E 854 standards, identified in 2.1. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.