BS EN 1591-1:2013-法兰及其接头带垫圈的圆形法兰连接的设计规则-国家数字标准馆

现行 BS EN 1591-1:2013

到馆阅读

收藏跟踪

购买正版

Flanges and their joints. Design rules for gasketed circular flange connections-Calculation 法兰及其接头带垫圈的圆形法兰连接的设计规则

发布日期： 2013-12-31

交叉引用:EN 13555:2004EN 1779:1999EN ISO 4014:2011ISO 4014:2011ISO 4016:2011ISO 261:1998ISO 724:1993CR 13642:1999VDI 2200:2007EN 1092-1:2007+A1:2013EN 1092-2:1997EN 1092-3:2003EN 1092-4:2002EN 1591-2:2008CEN/TS 1591-3:2007ISO 12807:1996EN 1759-1:2004EN 1759-3:2003EN 1759-3:2003EN 1753-1344-2003EN-1344-2005的最新修订版可在购买时获得包括在购买本文件时。

Cross References:EN 13555:2004EN 1779:1999EN ISO 4014:2011ISO 4014:2011EN ISO 4016:2011ISO 4016:2011ISO 261:1998ISO 724:1993CR 13642:1999VDI 2200:2007EN 1092-1:2007+A1:2013EN 1092-2:1997EN 1092-3:2003EN 1092-4:2002EN 1591-2:2008CEN/TS 1591-3:2007ISO 12807:1996EN 1759-1:2004EN 1759-3:2003EN 1759-4:2003EN 13445-3EN 13480-3NORSOK L-005: 2006All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS PD CEN/TR 1591-2-2020

Flanges and their joints. Design rules for gasketed circular flange connections-Gasket parameters
法兰及其接头带垫圈的圆形法兰连接的设计规则

Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
法兰及其接头.带垫圈的圆形法兰连接的设计规则.第2部分:垫圈参数；德文版EN 1591-2:2008

UNE-EN 1591-2-2010

Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
法兰及其接头.带垫圈的圆形法兰连接的设计规则.第2部分:垫圈参数

BS PD CEN/TR 1591-5-2012

Flanges and their joints. Design rules for gasketed circular flange connections-Calculation method for full face gasketed joints
法兰及其接头垫圈圆形法兰连接的设计规则全端面密封接头的计算方法

BS EN 13555-2021

Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
法兰及其接头与垫圈圆形法兰连接设计规则相关的垫圈参数和试验程序

UNE-EN 13555-2005

Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections.
法兰及其接头.与带垫圈的圆形法兰连接的设计规则有关的垫圈参数和试验程序

UNE-EN 1591-1-2002+A1-2009

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第1部分:计算方法

BS DD CEN/TS 1591-3-2007

Flanges and their joints. Design rules for gasketed circular flange connections-Calculation method for metal to metal contact type flanged joint
法兰及其接头垫圈圆形法兰连接的设计规则金属对金属接触式法兰接头的计算方法

DIN V ENV 1591-2

Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters; German version ENV 1591-2:2001
法兰及其接头.带垫圈的圆形法兰连接的设计规则.第2部分:垫圈参数；德文版ENV 1591-2:2001

BS 04/30121918 DC

EN 1591-3. Flanges and their joints. Design rules for gasketed circular flange connections. Part 3. Calculation method for metal to metal contact type flanged joint
EN 1591-3 法兰及其接头垫圈圆形法兰连接的设计规则第三部分金属对金属接触式法兰接头的计算方法

DIN CEN/TR 1591-5

Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints; German version CEN/TR 1591-5:2012
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第5部分:全表面带垫圈连接件的计算方法；德文版CEN/TR 1591-5:2012

DIN CEN/TS 1591-3

Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint; German version CEN/TS 1591-3:2007
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第3部分:金属对金属接触式法兰连接件的计算方法；德文版CEN/TS 1591-3:2007

UNE-CEN/TS 1591-4-2010 IN

Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定

BS 11/30234814 DC

BS EN 1591-4. Flanges and their joints. Design rules for gasketed circular flange connections. Part 4. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
英国标准EN 1591-4 法兰及其接头垫圈圆形法兰连接的设计规则第四部分根据压力设备指令对安装在设备上的螺栓接头组装人员进行资格鉴定

DIN CEN/TS 1591-4

Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定；德文版CEN/TS 1591-4:2007

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统