多部分可交付成果定义了用于测试ASiC容器的互操作性和一致性的测试套件。这套技术规范由四个文件组成。ASiC基线容器互操作性测试套件（第2部分）和ASiC基线容器技术一致性测试软件工具（第4部分）所需的规范是根据ETSI定义的 EN 319 162-1[i.1]。根据ETSI EN 319 162-2[i.2]定义了用于测试附加ASiC容器（第3部分）互操作性的测试套件，以及用于测试附加ASiC容器（第5部分）技术一致性的构建软件工具所需的规范。定义了用于测试除基线（第3部分）以外的ASiC容器的互操作性的测试套件，以及用于测试除基线（第5部分）以外的ASiC容器的技术一致性的构建软件工具所需的规范 反对:基于ETSI EN 319 162-1[i.1]第4.3条ASiC-S规定的构造块的容器 集装箱和ASiC-E集装箱的第4.4条；以及ETSI EN 319 162-2[i.2]中规定的附加容器。

The multi-part deliverable defines test suites for testing interoperability and conformance of ASiC containers. The set of Technical Specifications consists of four documents.The test suites for testing interoperability of ASiC baseline containers (Part 2) and the specification required for building software tools for testing technical conformity of ASiC baseline containers (Part 4) are defined against ETSI EN 319 162-1 [i.1]. The test suites for testing interoperability of additional ASiC containers (Part 3) and the specification required for building software tools for testing technical conformity of additional ASiC containers (Part 5) are defined against ETSI EN 319 162-2 [i.2].The test suites for testing interoperability of ASiC containers other than baseline (Part 3) and the specifications required for building software tools for testing technical conformity of ASiC containers other than baseline (Part 5) are defined against:containers based on the building blocks specified in ETSI EN 319 162-1 [i.1], clause 4.3 for ASiC-S containers and clause 4.4 for ASiC-E containers; andadditional containers as spedified in ETSI EN 319 162-2 [i.2].