MIL MIL-W-27664-惰性气体保护电弧点焊（无S/S文件）-国家数字标准馆

现行

MIL MIL-W-52161D Notice 1-Cancellation

WELDING SET, ARC, INERT GAS, SHIELDED: CONSUMABLE WIRE ELECTRODE (SUPERSEDING MIL-W-52161C) (NO S/S DOCUMENT)
惰性气体保护电弧焊接装置:自耗焊丝（代替MIL-W-52161C）（无S/S文件）

2000-08-25

现行

MIL MIL-W-52161D

WELDING SET, ARC, INERT GAS, SHIELDED: CONSUMABLE WIRE ELECTRODE (SUPERSEDING MIL-W-52161C) (NO S/S DOCUMENT)
惰性气体保护电弧焊接装置:自耗焊丝焊条（替代MIL-W-52161C）（无S/S文件）

1989-06-23

现行

MIL MIL-H-865D

HOLDERS, ELECTRODE, SHIELDED METAL ARC WELDING (NO S/S DOCUMENT)
焊条保护金属电弧焊支架（无S/S文件）

1976-12-13

现行

MIL MIL-W-80102C Notice 1-Validation

WELDING SET, ARC, GAS SHIELDED, CONSUMABLE ELECTRODE (SUPERSEDING MIL-W-80102B) (NO S/S DOCUMENT)
焊接组电弧气体保护消耗电极（取代MIL-W-80102B）（无S/S文件）

1990-06-06

现行

MIL MIL-W-80102C Notice 1-Cancellation

WELDING SET, ARC, GAS SHIELDED, CONSUMABLE ELECTRODE (SUPERSEDING MIL-W-80102B) (NO S/S DOCUMENT)
气体保护自耗电极电弧焊接装置（代替MIL-W-80102B）（无S/S文件）

1999-05-03

现行

MIL MIL-W-80102C

WELDING SET, ARC, GAS SHIELDED, CONSUMABLE ELECTRODE (SUPERSEDING MIL-W-80102B) (NO S/S DOCUMENT)
气体保护自耗电极电弧焊接装置（代替MIL-W-80102B）（无S/S文件）

1986-01-21

现行

MIL MIL-W-80105C Amendment 3

WELDING TORCH SETS, ARC, GAS SHIELDED TUNGSTEN ELECTRODE (S/S BY A-A-51187A AND A-A-55014)
气体保护钨极电弧焊炬组（S/S由A-A-51187A和A-A-55014提供）

1988-03-07

现行

MIL MIL-W-80105C Notice 1-Cancellation

WELDING TORCH SETS, ARC, GAS SHIELDED TUNGSTEN ELECTRODE (S/S BY A-A-51187A AND A-A-55014)
气体保护钨极电弧焊炬组（S/S由A-A-51187A和A-A-55014提供）

1992-07-16

现行

MIL MIL-STD-1892

WELDING, ARC AND OXYFUEL GAS, PROCESS AND REQUIREMENT FOR4 (NO S/S DOCUMENT)
焊接、电弧和氧气燃料气体、工艺和要求（无S/S文件）

1985-06-18

现行

MIL MIL-STD-2104 Notice 1-Cancellation

WELDING, TUNGSTEN ARC, GAS, MANUAL (GTAW-MA) REQUIREMENTS FOR (NO S/S DOCUMENT)
钨极气体保护焊手册（GTAW-MA）要求（无S/S文件）

1993-02-25

现行

MIL MIL-STD-2104

WELDING, TUNGSTEN ARC, GAS, MANUAL (GTAW-MA) REQUIREMENTS FOR (NO S/S DOCUMENT)
钨极气体保护焊手册（GTAW-MA）要求（无S/S文件）

1990-03-07

现行

MIL MIL-STD-372 Notice 1-Validation

WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (NO S/S DOCUMENT) (SUPERSEDING MIL-W-45205B)
焊接气体保护金属电弧和气体钨极电弧铝合金结构易于焊接不包括铠装（无S/S文件）（代替MIL-W-45205B）

1993-02-04

现行

MIL MIL-STD-372 Notice 2-Cancellation

WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (NO S/S DOCUMENT) (SUPERSEDING MIL-W-45205B)
焊接气体保护金属电弧和气体钨极电弧铝合金结构易于焊接不包括铠装（无S/S文件）（代替MIL-W-45205B）

1995-12-05

现行

MIL MIL-STD-372

WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (NO S/S DOCUMENT) (SUPERSEDING MIL-W-45205B)
焊接气体金属电弧和气体钨极电弧铝合金易于焊接用于结构不包括装甲（无S/S文件）（取代MIL-W-45205B）

1988-09-01

现行

AWS B2.1-8-025-2001(R2012)

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

现行

1A1W1S1 Archive Product 37

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

现行

AWS B2.1-1/8-229-2002-AMD1(R2013)

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
碳钢（M-1/P-1/S-1 第1组或第2组）与奥氏体不锈钢（M-8/P-8/S-8 第1组） 1/8至1-1/2英寸的气体保护金属极电弧焊后的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28

现行

AWS B2.1-8-214-2001(R2012)

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚 ER3XX ER3XX-XX 焊接状态主要用于管道应用

2001-03-01

现行

AWS B2.1-1-233-2006

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）

2006-01-01

现行

AWS B2.1-1-211-2001(R2012)

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe App.
1/8至1/2“厚、INMs-1、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊态或焊后热处理状态下用自耗嵌件进行钨极气体保护焊的标准WPS 主要用于管道应用

2001-10-31