现行

FED GGG-T-80A

TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
丝锥 螺纹切割 碳钢手工 切割螺纹 美国标准锥管螺纹（无S/S文件）

1970-11-24

现行

FED GGG-T-80A

TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
丝锥 螺纹切割 碳钢手工 切割螺纹 美国标准锥管螺纹（无S/S文件）

1970-11-24

现行

FED GGG-T-70B Notice 1-Cancellation

TAP, THREAD CUTTING, (STANDARD, AMERICAN NATIONAL FORM AND METRIC SPARK PLUG THREAD, HIGH-SPEED STEEL, GROUND THREAD, HAND) (SUPERSEDING GGG-T-70A) (S/S BY ASME-B94.9-1999)
丝锥 螺纹切削 （美国国家标准和公制火花塞螺纹 高速钢 磨光螺纹 手动）（替代GGG-T-70A）（S/S由ASME-B94.9-1999提供）

1998-09-08

现行

FED GGG-T-70B Notice 1-Cancellation

TAP, THREAD CUTTING, (STANDARD, AMERICAN NATIONAL FORM AND METRIC SPARK PLUG THREAD, HIGH-SPEED STEEL, GROUND THREAD, HAND) (SUPERSEDING GGG-T-70A) (S/S BY ASME-B94.9-1999)
丝锥 螺纹切削 （美国国家标准和公制火花塞螺纹 高速钢 磨光螺纹 手动）（替代GGG-T-70A）（S/S由ASME-B94.9-1999提供）

1998-09-08

现行

FED GGG-T-0070C

TAP, THREAD CUTTING (HIGH SPEED STEEL, GROUND THREAD, HAND AND SPARK PLUG) (SUPERSEDING GGG-T-0070B)
丝锥、螺纹切削（高速钢、磨螺纹、手动和火花塞）（替代GGG-T-0070B）

1968-10-18

现行

FED GGG-T-0070C

TAP, THREAD CUTTING (HIGH SPEED STEEL, GROUND THREAD, HAND AND SPARK PLUG) (SUPERSEDING GGG-T-0070B)
丝锥、螺纹切削（高速钢、磨螺纹、手动和火花塞）（替代GGG-T-0070B）

1968-10-18

现行

NASM 24625 Rev.2

SCREW, TAPPING, THREAD CUTTING, TYPE BF OR BT, PAN HEAD, CROSS-RECESSED, CARBON STEEL
碳钢十字槽平头BF或BT型自攻螺纹切削螺钉

2016-12-30

现行

MIL MS51485 Notice 3-Validation 2

SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
碳钢十字槽D、F、G或T型盘头自攻螺钉

2018-09-14

现行

MIL MS51485

SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS-RECESSED, CARBON STEEL
碳钢十字槽D、F、G或T型盘头自攻螺纹切削螺钉

1984-08-01

现行

NASM 24629 Rev.1

Screw, Tapping, Thread Cutting, Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated
镀碳镉钢十字槽盘头D、F、G或T型自攻螺纹切削螺钉

2011-12-22

现行

NASM 24627 Rev.1

Screw, Tapping, Thread Cutting, Types D,F,G or T, Flat 82 degree Countersunk Head, Cruciform Recess, Carbon Steel
碳钢十字槽82度沉头D、F、G或T型螺纹切削自攻螺钉

2013-02-28

现行

MIL MS24625C Notice 2-Validation

SCREW, TAPPING-THREAD CUTTING, TYPE BF OR BT, PAN HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24625B)(S/S BY NASM24625-1998)
BF或BT型自攻直通切割螺钉 十字槽盘头 碳钢（取代MS24625B）

1994-06-24

现行

MIL MS24625C Notice 3-Cancellation

SCREW, TAPPING-THREAD CUTTING, TYPE BF OR BT, PAN HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24625B)(S/S BY NASM24625-1998)
BF或BT型自攻直通切割螺钉 十字槽盘头 碳钢（取代MS24625B）

1998-06-30

现行

MIL MS24625C

SCREW, TAPPING-THREAD CUTTING, TYPE BF OR BT, PAN HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24625B)(S/S BY NASM24625-1998)
BF或BT型碳钢十字槽盘头自攻螺纹切削螺钉（取代MS2462B）（由NASM24625-1998提供）

1969-08-27

现行

MIL MS24627 Notice 3-Cancellation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (S/S BY NASM24627-1998)
碳钢十字槽82度沉头D、F、G或T型自攻螺纹切削螺钉（NASM24627-1998标准S/S）

1999-10-27

现行

MIL MS24629C Notice 1-Validation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS RECESSED, STEEL, CARBON CADMIUM PLATED (SUPERSEDING MS24629B)(S/S BY NASM24629-1998)
螺丝 TAPPING-THREAD CUTTING TYPE D F G或T PAN HEAD CROSS RECESSED STEEL CARBON CADMIUM PLATED（SUPERSEDING MS24629B）（S/S BY NASM24629-1998）

1988-05-20

现行

MIL MS24629C Notice 2-Validation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS RECESSED, STEEL, CARBON CADMIUM PLATED (SUPERSEDING MS24629B)(S/S BY NASM24629-1998)
D、F、G或T型十字槽钢制镀碳镉平头自攻螺钉（取代MS24629B）

1996-03-25

现行

MIL MS24629C Notice 3-Cancellation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS RECESSED, STEEL, CARBON CADMIUM PLATED (SUPERSEDING MS24629B)(S/S BY NASM24629-1998)
D、F、G或T型十字槽钢制镀碳镉平头自攻螺钉（取代MS24629B）

1998-06-30

现行

MIL MS24629C

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T PAN HEAD, CROSS RECESSED, STEEL, CARBON CADMIUM PLATED (SUPERSEDING MS24629B)(S/S BY NASM24629-1998)
镀碳镉十字槽钢D、F、G或T型盘头自攻螺纹切削螺钉（取代MS24629B）（由NASM24629-1998提供）

1967-08-28

现行

MIL MS24627C Notice 1-Validation

SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL (SUPERSEDING MS24627B)(S/S BY NASM24627-1998)
螺丝 TAPPING-THREAD切割 D F G或T型 平面82度 COUNTERSUNK HEAD CROSS-RECESSED 碳钢（取代MS24627B）（S/S BY NASM24627-1998）

1988-05-20