SAE AS7110/4D-Nadcap对电阻焊（点焊、缝焊、凸焊）的要求-国家数字标准馆

现行 SAE AS7110/4D

到馆提醒

收藏跟踪

购买正版

Nadcap Requirements for Resistance Welding (Spot, Seam, Projection) Nadcap对电阻焊（点焊、缝焊、凸焊）的要求

发布日期： 2007-03-06

本规范已于2007年3月宣布“取消”。通过这一行动，本文件将保留在航空航天标准索引的数字部分。

This specification has been declared "CANCELLED" as of March 2007. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

BS EN ISO 17677-1-2021

Resistance welding. Vocabulary-Spot, projection and seam welding
电阻焊词汇

ISO 17677-1-2021

Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
电阻焊 - 词汇 - 第1部分:点焊投影和接缝焊接

저항 용접 — 저항 점용접, 프로젝션,심용접의 용접성 로브 결정 절차
电阻焊.电阻点焊凸焊和缝焊可焊性凸角的测定程序

BS EN ISO 14327-2004

Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding
电阻焊电阻点焊、凸焊和缝焊可焊性的测定程序

GB/T 39166-2020

电阻点焊、凸焊及缝焊接头的机械剥离试验方法
Test method of mechanized peel for resistance spot, projection and seam welds

BS EN ISO 14329-2003

Resistance welding. Destructive tests of welds. Failure types and geometric measurements for resistance spot, seam and projection welds
电阻焊焊缝的破坏性试验电阻点焊、缝焊和凸焊的故障类型和几何测量

KS B ISO 14271(2024 Confirm)

저항 용접 — 저항 점 용접부, 프로젝션 용접부 및 심 용접부의 비커스 경도 시험(저하중, 미세경도)
电阻焊——电阻点焊、凸焊和缝焊的维氏硬度试验（低力和显微硬度）

저항 용접 — 저항 점 용접부, 프로젝션 용접부 및 심 용접부의 비커스 경도 시험(저하중, 미세경도)
电阻焊.凸焊和缝焊电阻点焊的维氏硬度试验（低力和显微硬度）

Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
电阻焊.凸焊和缝焊电阻点焊的维氏硬度试验（低力和显微硬度）

BS EN ISO 14271-2017

Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
电阻焊电阻点焊、凸焊和缝焊的维氏硬度试验（低力和显微硬度）

GB/T 39082-2020

电阻点焊、凸焊及缝焊接头的维氏硬度试验方法
Test method of vickers hardness testing for resistance spot,projection and seam welds

ISO 18278-1-2022

Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
电阻焊.可焊性.第1部分:金属材料电阻点焊、缝焊和凸焊可焊性评定的一般要求

KS C ISO 18594(2017 Confirm)

저항 점－, 프로젝션－, 심 용접－알루미늄과 강재의 천이저항 측정 방법
电阻点焊、凸焊和缝焊—测定铝和钢材料过渡电阻的方法

저항 점-, 프로젝션-, 심 용접 — 알루미늄과 강재의 천이저항 측정 방법
电阻点焊、凸焊和缝焊.铝和钢材料过渡电阻的测定方法

Resistance spot-, projection- and seam-welding — Method for determining the transition resistance on aluminium and steel material
电阻点焊、凸焊和缝焊——铝和钢材料过渡电阻的测定方法

BS EN ISO 18594-2007

Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material
电阻点焊、凸焊和缝焊铝和钢材料过渡电阻的测定方法

UNE-EN ISO 14327-2005

Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004)
电阻焊.电阻点焊、凸焊和缝焊可焊性的测定程序（ISO 14327-2004）

UNE-EN ISO 17677-1-2010

Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2009)
电阻焊.词汇.第1部分:点焊凸焊和缝焊（ISO 17677-1-2009）

KS C ISO 14270(2021 Confirm)

필 시험을 위한 점저항 용접, 심 용접 및 프로젝션 용접의 시험 표준편 치수와 절차
机械剥离试验电阻点焊、缝焊和凸焊的试样尺寸和程序

필 시험을 위한 점저항 용접, 심 용접 및 프로젝션 용접의 시험 표준편 치수와 절차
机械化剥离试验电阻点接缝和压花凸起焊缝的试样尺寸和程序

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统