BS EN ISO 15085:2003+A2:2018规定了旨在将落水风险降至最低的安全装置和装置的设计、结构和强度要求，以及促进重新装船的要求。它描述了可单独使用或组合使用以实现这些目标的方法，并适用于船体长度不超过24 m的小型船舶。交叉引用:EN ISO 12217-3（ISO 12217-3:2002 AS）ISO 12217-2:2002 Ed 1EN ISO 12217-1（ISO 12217-1:2002 AS）ISO 12217-3:2002 Ed 1ISO 8666:2002（R10）Ed 1EN ISO 8666（ISO 8666:2002 AS）ISO 12217-1:2002 Ed 1EN ISO 12217-2（ISO 12217-2:2002 AS）ISO 12401ISO 12216:2002（R10）Ed 1ISO 13590:1997ISO 6185: 2001年包含以下内容:修正案，2018年5月；勘误表，2015年11月

BS EN ISO 15085:2003+A2:2018 specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of falling overboard, and requirements to facilitate reboarding.It describes means which can be used individually or combined to achieve these objectives, and applies to small craft of up to 24 m length of hull.Cross References:EN ISO 12217-3 (ISO 12217-3:2002 AS)ISO 12217-2:2002 Ed 1EN ISO 12217-1 (ISO 12217-1:2002 AS)ISO 12217-3:2002 Ed 1ISO 8666:2002 (R10) Ed 1EN ISO 8666 (ISO 8666:2002 AS)ISO 12217-1:2002 Ed 1EN ISO 12217-2 (ISO 12217-2:2002 AS)ISO 12401ISO 12216:2002 (R10) Ed 1ISO 13590:1997ISO 6185:2001Incorporates the following:Amendment, May 2018; Corrigendum, November 2015