1.1本规范涵盖了含铁和有色金属英寸球的要求。本规范中涵盖的滚珠用于轴承、轴承应用、止回阀和其他使用滚珠的部件。 1.2本规范为通用规范。单项要求应符合本规范中的规定，并符合MS表格标准。如果本规范的要求与MS-sheet标准之间存在任何冲突，应以MS-sheet标准为准。 1.3以英寸-磅为单位给出的值应视为标准值。括号中给出的值仅供参考。 1.4本规范包含MIL-B-1083的许多要求，MIL-B-1083最初由国防部制定，由里士满国防供应中心维护。 以下政府活动代码可在国防部标准化目录SD-1中找到。 准备活动 保管人 审查活动 DLA-GS 陆军位于 陆军AV、EA、AR、MI 海军操作系统 海军SH 空军-99 空军-11，84 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管要求的适用性。

1.1 This specification covers requirements for ferrous and nonferrous inch balls. The balls covered in this specification are intended for use in bearings, bearing applications, check valves, and other components using balls. 1.2 This is a general specification. The individual item requirements shall be as specified herein in accordance with the through MS sheet standards. In the event of any conflict between requirements of this specification and the through MS sheet standards, the latter shall govern. 1.3 The values given in inch-pound units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This specification contains many of the requirements of MIL-B-1083, which was originally developed by the Department of Defense and maintained by the Defense Supply Center Richmond. The following government activity codes may be found in the Department of Defense, Standardization Directory SD-1. Preparing Activity Custodians Review Activities DLA-GS Army-AT Army-AV, EA, AR, MI Navy-OS Navy-SH Air Force-99 Air Force- 11, 84 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.