ISO 11127-7:2022-涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第7部分:水溶性氯化物的测定-国家数字标准馆

现行 ISO 11127-7:2022

到馆阅读

收藏跟踪

购买正版

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides 涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的试验方法.第7部分:水溶性氯化物的测定

发布日期： 2022-11-24

本文件规定了测定非金属喷砂磨料中水溶性氯化物的三种方法，即安培滴定法、分光光度法和离子色谱法。
本文件是ISO的一部分？11127系列涉及喷砂清理用非金属磨料的取样和测试。
非金属磨料的类型和对每种磨料的要求都包含在ISO？11126系列。
ISO？11126系列和ISO？11127系列已被起草为一套连贯的非金属喷砂清理磨料国际标准。

This document specifies three methods for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives, namely, amperometric titration, spectro-photometry and ion chromatography.
This document is part of the ISO？11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.
The types of non-metallic abrasive and requirements on each are contained in the ISO？11126 series.
The ISO？11126 series and the ISO？11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.220.10表面处理和镀涂 - 表面预处理

关联关系

研制信息

归口单位： ISO/TC 35/SC 12

相似标准/计划/法规

BS 7079-F9-1999

Preparation of steel substrates before application of paints and related products. Specification for Staurolite
涂料和相关产品使用前钢衬底的制备十字石规范

General introduction to standards for preparation of steel substrates before application of paints and related products
涂料和相关产品使用前钢衬底制备标准概述

BS EN ISO 8504-1-2019

Preparation of steel substrates before application of paints and related products. Surface preparation methods-General principles
涂料和相关产品使用前钢衬底的制备表面处理方法

GB/T 18839.1-2002

涂覆涂料前钢材表面处理表面处理方法总则
Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles

BS EN ISO 8504-2-2019

Preparation of steel substrates before application of paints and related products. Surface preparation methods-Abrasive blast-cleaning
涂料和相关产品使用前钢衬底的制备表面处理方法

GB/T 18839.2-2002

涂覆涂料前钢材表面处理表面处理方法磨料喷射清理
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning

KS M ISO 8504-1

도료 및 관련 제품의 도장 전 철강 소지 표면처리 — 표면처리 방법 —제1부: 일반 원리
涂料和相关产品使用前钢衬底的制备.表面制备方法.第1部分:一般原则

KS M ISO 8504-1(2017 Confirm)

도료 및 관련 제품의 도장 전 철강 소지 조정－표면 조정 방법－제1부：일반 원리
涂料和有关产品使用前钢基体的制备表面处理方法第1部分:总则

ISO 8504-4-2022

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling
涂料和相关产品使用前钢衬底的制备.表面制备方法.第4部分:酸洗

BS EN ISO 8504-3-2018

Preparation of steel substrates before application of paints and related products. Surface preparation methods-Hand- and power-tool cleaning
涂料和相关产品使用前钢衬底的制备表面处理方法

ISO 8504-1-2019

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
油漆及相关产品应用前钢基材料的制备 - 表面处理方法 - 第1部分:一般原则

GB/T 18839.3-2002

涂覆涂料前钢材表面处理表面处理方法手工和动力工具清理
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning

KS M ISO 8504-2(2017 Confirm)

도료 및 관련 제품의 도장 전 철강 소지 조정－표면 조정 방법－제2부：연마재 마찰 세정
涂装涂料和有关产品前钢材表面处理表面处理方法第2部分:喷砂清理

ISO 8504-5-2024

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 5: Water jet cleaning
涂料和相关产品应用前钢基材的制备——表面处理方法——第5部分:喷水清洗

ISO 8504-2-2019

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
涂料和相关产品之前制备钢基材 - 表面处理方法 - 第2部分:磨料喷砂清洗

BS EN ISO 11124-5-2021

Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Cut steel wire
涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范

BS ISO 11124-5-2019

Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Cut steel wire
涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范

BS EN ISO 11126-9-2004

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Staurolite
涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料规范

BS EN ISO 11126-8-2018

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Olivine
涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料规范

BS 7079-F10-2000

Preparation of steel substrates before application of paints and related products. Non-metallic blast-cleaning abrasives. Almandite garnet
涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料铁铝榴石石榴石

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统