ISO 5395-2:2013规定了内燃机驱动的行人控制（带或不带sulky）旋转式割草机和滚筒式割草机（以下简称“割草机”）的安全要求及其验证，并配备:金属切割装置；和/或非金属切割指一个或多个切割元件以枢轴方式安装在一般圆形驱动装置上，这些切割元件依靠离心力实现切割，每个切割元件的动能为10 J或以上。 不适用于:机器人和远程控制割草机、连枷割草机、草地割草机、镰刀杆割草机、牵引式/半悬挂式割草机和灌木清理机；电动和电池驱动的割草机；带摆动手柄的行人控制割草机。 请注意，IEC 60335-1和IEC 60335-2-77给出了行人控制的步行式电动割草机的要求。 ISO 5395-2:2013规定了所有与割草机有关的重大危险、危险情况或事件，当割草机按预期使用时，以及在制造商可合理预见的误用条件下。 本标准不适用于本文件出版日期之前制造的割草机。

ISO 5395-2:2013 specifies safety requirements and their verification for combustion-engine-powered pedestrian-controlled (with or without sulky) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more. It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; electrically powered and battery-powered lawnmowers; pedestrian-controlled lawnmowers with a swing-over handle. Note that IEC 60335-1 together with IEC 60335-2-77 give requirements for pedestrian-controlled walk-behind electrically powered lawnmowers. ISO 5395-2:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer. It is not applicable to lawnmowers which are manufactured before the date of publication of this document.