1.1 本试验方法包括测定人造岩石和矿渣矿物纤维绝缘材料的非纤维含量（丸粒）的程序。该程序包括一种干筛分析方法，用于区分人造岩石和矿渣矿物纤维绝缘试样的纤维化和非纤维化（喷丸）部分。 1.2 本试验方法不适用于含有除岩石和矿渣矿物纤维、油和有机热固化粘合剂以外的任何成分的岩石或矿渣材料。不包括含有其他类型纤维、无机粘合剂或耐火粘土的产品。 注1: 工业用油，如矿物油或合成油，可用于增强疏水性和防尘性。 1.3 以英寸磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 4.1 无机纤维隔热材料可以包含不同量的非纤维材料。非纤维材料对绝缘材料的绝缘值没有贡献，因此需要确定该量的程序。 一些规格涉及通过该测试方法确定的各种屏幕尺寸上的镜头含量和保留百分比（%）。

1.1 This test method covers a procedure for determining the non-fibrous content (shot) of man-made rock and slag mineral fiber insulation. The procedure covers a dry sieve analysis method to distinguish between fiberized and non-fiberized (shot) portions of a specimen of man-made rock and slag mineral fiber insulation specimen. 1.2 This test method does not apply to rock or slag materials containing any components other than rock and slag mineral fiber, oil, and organic thermal setting binders. Products containing other types of fibers, inorganic binders, or refractory clays are excluded. Note 1: Industrial oils such as mineral or synthetic can be used to enhance the hydrophobic qualities and dust suppression. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Inorganic fibrous thermal insulation can contain varying amounts of non-fibrous material. Non-fibrous material does not contribute to the insulating value of the insulation and therefore a procedure for determining that amount is desirable. Several specifications refer to shot content and percent (%) retained on various screen sizes determined by this test method.