由终端设备提供的技术特征，该终端设备能够连接到公共电信网络（1），并使用DECT无绳通信。这些要求应适用于提供任何电话应用的DECT设备。这种终端设备的无绳传输在1880-1900 MHz的频带内工作。除适用于适当公共网络的附件要求外，还应适用该要求；除DECT的CTR外，电话应用的一般附件要求。DECT由两个设备元件组成，分别称为固定部件（FP）和便携式部件（PP）。 本文件的目的是确保能够进行电话应用的DECT设备的空中接口互操作性，从而使符合本文件所述程序的任何DECT FP能够与符合本文件所述程序的任何DECT PP进行互操作。FP和/或PP应符合本文件中的要求和试验。本文件的结构允许FP和PP作为单独项目进行型式认证。如果DECT FP连接到PSTN，并且语音电话的要求存在特定的国家差异，则这些差异应在FP内进行调节，以便PP是通用的。 （1） 注1:基本速率ISDN的CTR、基本速率ISDN的CTR或PSTN的国家法规（实施ETS 300 001）。DECT终端与GSM网络的互联仍在研究中；在适当的时候，范围声明可能需要修改以反映这一点。注2:预计本文件将以ETS 300 175的无线电和协议规定为基础

Technical charcteristics which shall be provided by terminal equipment which is capable of connection to a public telecommunications network (1) and which uses DECT cordless communications. These requirements shall apply to DECT equipment providing any telephony application. The cordless transmission of such terminal equipment operate within the frequency band 1880-1900 MHz. It shall apply in addition to the attachment requirements for the appropriate public network; and in addition to the CTRs for DECT General attachment requirement for telephony applications. DECT comprises two equipment elements referred to as Fixed Part (FP) and Portable Part (PP). The objective of this document is to ensure the air interface interoperability of DECT equipment capable of telephony applications, in such a way that any DECT FP conforming to the procedures described in this document shall be capable of interoperability with any DECT PP conforming to the procedures described in this document. The FP and/or the PP shall conform to the requirements and tests in this document. This document is structured to allow type approval of the FP and PP as separate items. Where the DECT FP is connected to a PSTN, and where there are specific national variations in the requirements for voice telephony, these shall be accomodated within the FP so that the PP shall be common. (1) Note 1: CTR for basic rate ISDN, CTR for primary rate ISDN, or national regulations (implementing ETS 300 001) for PSTN. Inteconnection of DECT terminals to the GSM network is still under study; in due course, the scope statement may need amending to reflect this point. Note 2: It is expected that this document will be based on the radio and protocol provisions of ETS 300 175